Photogenic Professional Lighting PowerLight 1250 manual Safety Precautions, Preparation and Basics

Page 3

SAFETY PRECAUTIONS

Despite the measures that have been taken to make electronic flash equipment safe, it must be recognized that high voltages and high temperatures do exist within the power supply / lighting unit. Certain precautions must be observed in handling the unit. Contact with internal high voltage may result in severe injury or death.

1.Before installing or removing the flashtube and modeling lamp, be sure this appliance is turned off, cooled and unplugged from AC power source.

2.Do not touch the glass tubes with bare hands, as normal body oils will shorten the bulb’s life. Always use a clean cloth or wear gloves to protect your hand from glass breakage and heat.

3.Do not defeat the purpose to the three-wire line cord by disconnecting the ground. Connect to properly functioning and grounded 3-pin receptacles only. If you are using an extension cord, be sure the cord has an equivalent or greater rating and has a ground.

4.Do not insert a screwdriver or other metal objects into the flashtube socket area or vents. Contact with high voltage may result.

5.Do not operate this appliance with a frayed or damaged line cord. When replacing or using the unit with an extension cable, be sure the cable has an equivalent or greater rating and is a properly connected 3-wire grounded cable.

6.Do not attempt to use this appliance if it has been dropped or damaged, until a qualified service person has serviced it.

7.Do not operate the unit with a damaged or broken flashtube or modeling lamp. Do not use flashtubes with broken, cracked or missing glass envelopes. To prevent damage always use Photogenic specified replacements for the flashtubes and modeling lamps.

8.Perform no internal service work on this unit. Refer all such service to a qualified service person or return to the factory. This will provide you safety and continuation of your warranty.

9.Do not operate when water is present and from extreme temperature shifts. If the unit is stored in hot or below freezing temperatures, allow at least one hour at room temperatures before using.

PREPARATION AND BASICS

Unpacking and Setup:

Unpack all units carefully to remove all parts from the carton(s). Do not discard or destroy the packing material until the equipment has been inspected, assembled, and all parts accounted for.

After unpacking, all parts should be examined for any damage, which may have been caused by rough handling during shipment. If any damage is detected, contact the delivering carrier at once. Claim for damage should be made to the delivering carrier before destroying packing cartons.

To set up the unit, first mount and secure it on a suitable stand. The PowerLight stand adapter allows the unit to be mounted on a stand with a 3/8” to 5/8” post. Be sure to use a stand that is stable and will not tip easily.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Powerlight Introduction PowerLight PowerLight 1250DR PowerLight 2500DRPreparation and Basics Safety PrecautionsPunch out hole for Unpacking and SetupPower Input Control Panel and Basic OperationCircuit Protection Power Switch PowerLight Model PL1250 Flash PowerReady Light Modeling Light PL1250DR and PL2500DR AccessoriesPowerLight Models 1250DR and 2500DR Automatic Flash Dump PowerLight Models 1250, 1250DR and 2500DRTest Function Flash IndicationInch PowerLight Model 1250 and 1250DRFlashing Rate Reflector DiameterGeneral Stop resolutionDigital Display Accessory PL1250 & PL1250DRExposure Information PowerLight Model 2500DRMaximum f-stops Control AccessoryPL2500DR 32 to 1000 watt-secondsModels PL1250DR, and PL2500DR only Advanced Powerlight FeaturesAdvanced PL2 series Accessories Advanced PL2 series Accessories Reflectors Powerlight Quick Change AccessoriesUmbrellas SoftboxesPhotographer should not attempt to make repairs Common Problems and Causes General Trouble ShootingLimited PowerLight Warranty

PowerLight 1250, 1250, 1250DR, 2500DR specifications

Photogenic, known for its commitment to quality and innovation in professional lighting, offers a range of powerful and versatile studio lights ideal for photographers and videographers alike. Among its standout products are the Photogenic Professional Lighting 1250, 1250DR, 2500DR, and PowerLight 1250. Each model is designed to enhance the creative process, providing the essential tools necessary to achieve stunning results in various shooting conditions.

The Photogenic Professional Lighting 1250 is a powerful yet compact studio light that delivers consistent and reliable performance. With a wattage of 1250, it offers impressive output to fill any space with bright, high-quality light. This model features adjustable power settings, enabling users to fine-tune the intensity for optimal lighting control. Its durable build and ease of use make it a favorite among professionals.

The 1250DR takes things a step further by incorporating digital control technology. This advanced model features an intuitive LCD display that allows users to monitor and adjust settings with precision. The 1250DR also includes a built-in modeling light, which assists in visualizing the final shot before capture. Additionally, its enhanced cooling system ensures extended usage without overheating, which is essential during long photo sessions.

Another noteworthy entry in the line-up is the Photogenic 2500DR. This powerhouse offers a staggering 2500-watt output, making it particularly suited for large studio setups or demanding outdoor shoots. Similar to the 1250DR, the 2500DR features digital controls and an integrated LCD screen. Its impressive build quality and reliable performance make it a sought-after light for professional applications, ensuring exceptional results in portrait, fashion, and product photography.

Finally, the PowerLight 1250 is a versatile lighting solution that strikes a balance between power and portability. With its robust design and ability to function on both AC and DC power, the PowerLight 1250 is perfect for photographers on the go. It is equipped with a quick-release mounting system, allowing for seamless adjustments and setup. The adjustable power settings give photographers the flexibility they require for various lighting scenarios.

In summary, the Photogenic lighting series — including the 1250, 1250DR, 2500DR, and PowerLight 1250 — brings exceptional technology and features to the table. Whether you need a compact studio light or a high-output solution, these models cater to diverse needs, ensuring that professionals have the tools they need to create breathtaking images and videos. Combining performance, durability, and usability, Photogenic’s offerings remain at the forefront of professional lighting solutions.
Top Page Image Contents