Photogenic Professional Lighting PLRX1000DR, PLRX500DR Digital Control Panel and Basic Operation

Page 5

DIGITAL CONTROL PANEL AND BASIC OPERATION:

Power Input:

The power required to operate the Solair Radio-Sync, Constant-Color PLR500DR or PLR1000DR is 105 to 125 volts AC, 60 Hz, 5 Amp. The power cord has a 125V, 15 Amp. rating. [The Voltage Smart Solair Radio-Sync, Constant-Color PLRX500DR or PLRX1000DR is rated 90 to 250 volts AC, 50/60 Hz, 3.5 Amp and has a 230V power cord with a German/European plug. These Voltage Smart units have no recharge line current surge.] Replacement cords or extension cords rated for less amperage may overheat and should not be used with PowerLights.

Circuit Protection:

Circuit protection automatically protects this appliance from excessive damage due to circuit or component failure. Operation exceeding the rated cycle of the appliance may cause the fuse to open. [Always replace fuse with same rating of fuse.] An additional thermal protector is located inside the PowerLight and may open, if the rated duty cycle is exceeded. A cooling off period of 10 to 45 minutes is required to reset the thermal fuse. There is also protection in the microcontroller software which is designed to protect against exceeding the rated flash cycles. See Diagnostic Display Codes: below.

To replace a blown fuse (power cord must be disconnected), simply unscrew the fuse holder cap (bottom of unit) and replace the exposed fuse with a new fuse. If fuses continue to blow, contact your dealer or qualified service person. (See specification section for fuses replacements)

Power-Up display sequence.

The processor will search the unit for functions that have been activated from the last time the light was used. As this search is done the first display reads “8888”. Next in the search sequence is AC and Hertz and you will see 50 or 60 displayed. If Auto- Bracketing is active you will see =br= followed by the High “H” setting and then the Low “L” setting. The final standard sequence displays the unit number designated for the light, 1 through 9. When the search cycle is complete, the display will then show the setting for flash watt seconds.

“See Advanced Features & Diagnostic Display Codes.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Powerlight Introduction SolairPreparation and Basics Safety PrecautionsPage Circuit Protection Power InputDigital Control Panel and Basic Operation Flash Power Power SwitchPLRX1000DR Ready LightTest Function Modeling LightMisfire Indication Synchronization and TriggeringPage Page Flash Duration Flash Duration Reciprocity Explained LONG-EXPOSURE Effects Operational Parameters General SpecificationsOperational Parameters ±100K over entire 8 f-stops Automatic Discharge Advanced Powerlight FeaturesPage Must be used with Plirc controller PLDIR-2 Remote digital display and Infrared receiverCommon Problems and Causes General Trouble ShootingPhotographer should not attempt to make internal repairs ServicePowerLight! Infrared Studio-Control Accessories Reflectors POWERLIGHT! QUICK-CHANGE# AccessoriesCounter-Balance weights

PLR1000DR, PLR500DR, PLRX500DR, PLRX1000DR specifications

Photogenic Professional Lighting has established itself as a leading innovator in the realm of photography and videography equipment. Among their range of products, the PLRX1000DR, PLRX500DR, PLR500DR, and PLR1000DR lights are notable for their advanced features and superior performance.

The PLRX1000DR is a high-powered lighting solution designed for professional photographers and videographers. With a maximum output of 1000 watts, this unit is perfect for large studio setups or outdoor shoots where powerful lighting is required. One of its standout features is the built-in digital display that offers precise control over power settings, allowing users to adjust the light intensity and manage the color temperature with ease. The PLRX1000DR also employs advanced thermal management technology, ensuring the unit remains cool during extended use, which enhances its durability.

Meanwhile, the PLRX500DR is a versatile option, delivering 500 watts of output. Ideal for smaller studio environments or portrait photography, the PLRX500DR includes an innovative wireless remote control system, providing photographers with the flexibility to adjust settings wirelessly. This feature not only saves time but also allows for creative adjustments on-the-fly, especially in dynamic shooting conditions.

The PLR500DR and PLR1000DR lights, with outputs of 500 watts and 1000 watts respectively, cater to photographers who seek a reliable and efficient lighting solution. Both models are equipped with a robust aluminum construction that ensures durability without compromising portability. They are designed with user-friendliness in mind, featuring simple operation buttons and intuitive interface displays.

Photogenic's proprietary softbox technology is employed across these models, allowing for soft, even lighting that minimizes harsh shadows—this is crucial for professional photography and videography. Moreover, they are compatible with various light modifiers, giving users the ability to customize their lighting to suit any shooting scenario.

In summary, the PLRX1000DR, PLRX500DR, PLR500DR, and PLR1000DR from Photogenic Professional Lighting represent cutting-edge technology with features designed for today's creative professionals. From powerful outputs and wireless controls to robust construction and soft lighting capabilities, these units are built to meet the demands of high-level photography and videography. Whether in the studio or on location, these lights are reliable partners in achieving stunning visual results.
Top Page Image Contents