Phonetics SCADA 3000 manual Introduction, Technical Support

Page 5

Annunciator Module

Introduction

The SCADA 3000 Annunciator Module is an optional component for use with the SCADA

3000 system. The module provides 8 programmable LED indicators to display the status of assigned I/O points. The LEDs are bi-color (red/amber), which means that each LED is always on, thereby preventing a false reading due to a burned-out LED. Red indicates an active or ON condition and Amber indicates an inactive or OFF condition. The Annunciator LEDs appear as two-state (ON/OFF) outputs in the SCADA 3000 software. The Annunciator module is housed in a 1/8 DIN enclosure for convenient panel mounting.

Technical Support

If any questions arise upon installation or operation of the Annunciator Module, please contact Phonetics Customer Service Department at the number shown below and have the following information:

•

Date of purchase

__________________

•

Serial number

__________________

Technical support is available from 8:00 AM to 5:00 PM, EST.

You can also contact technical support at any time via e-mail at: support@sensaphone.com

Phonetics, Inc.

901 Tryens Road

Aston, PA 19014

Phone: (610)558-2700

FAX: (610)558-0222

www.sensaphone.com

AM-5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Annunciator Module ScadaScada 3000 User’s Manual FCC Requirements Important Safety InstructionsContents Technical Support IntroductionOperating Environment InstallationRear view of mounted annunciator module Power Supply and GroundingCorrect daisy chain setup Main unit on the end Communications WiringBus Termination Setting the Bus AddressHow the Annunciator Module Works Enclosure Appendix a SpecificationsImportant Information for Canadian Customers Appendix B Returning Module for ServiceYear Limited Warranty
Top Page Image Contents