Plawa Scrivo.1 manual

Page 12

4.After step number 3, you will see a new window as shown below. Select “COM Ports” and then click the “Add” button for adding COM Ports.

5.In the Add COM Port window, select the “Incoming” button and click “OK”, as shown above. The window with the added COM ports will appear, as follows. You can check your connec- tion status by looking at the Bluetooth icon in the system tray on the bottom right.

6.Select “Options” in the Bluetooth Devices Window and then check the correspondent boxes as shown below.

7.Select “Devices” in the Bluetooth Devices Window and then click the “Add” button for adding the device.

8.When the window “Add Bluetooth Device Wizard“ is displayed, turn on scrivo.1´s power switch and pair it with scrivo.1´s cradle (receiver). Then, click “Next”.

22

23

Image 12
Contents User’s Guide Page Description System RequirementsUsing scrivo.1 Page Installing and Configuring Bluetooth Page Page Page Page Page Page Page Page Scrivo.1 Driver and Software 2529Page Page Using Finger NoteTM Page Troubleshooting