APPLICATION GUIDE
SELF TEST
Press both the power and the feed button 
together to turn on the printer, the printer will
perform a self test and print out test result as in the example at right.
There are several important information contained in the printout, what noted here are only examples. Actual result will show different data from the example.
PAIRING WITH MT-2000 SERIES
A “Pairing” between a mobile printer MP-300 and a mobile terminal MT-2000 series has to be established before the MP-300 can start service for the specific terminal. The MP-300 supports the “Pairing mode” in the first 40 seconds from being powered up. In the “Pairing mode”, the MP-300 can respond to the BlueTooth Scan command from MT-2000 series. The MP-300 responds only to the WakeUp command or normal operation commands from an already paired MT-2000 series mobile terminal after this period. An established “Pairing” relationship remains effective even after MP-300 power recycle (turn off and then turn on again) and termination and re-engagement of application program in MT-2000 series. In other words, MT-2000 series needs only to “WakeUp” the relationship instead of re-doing the “Scan” in such circumstances. However, for a MP-300 to serve for another new MT-2000 series, the new “Pairing” relationship must be established with the new terminal. In other words, the MP-300 must be set in “Pairing mode” again and do “Scan” from the new MT-2000 series.
Part 7
