POSIFLEX Business Machines pp-7000U-III, pp-7000-III manual SW Pos, Baud rate, Or Interface

Page 3

Effect of posit ions 1 & 2 on baud rate is defined as in table below with parity check set according to position 3, number of data bits always set to 8, and stop bit set to 1. When the parallel interface is used, please set both positions to ON.

SW Pos. 1

ON

OFF

ON

OFF

SW Pos. 2

ON

ON

OFF

OFF

Baud rate

38400 bps /

4800 bps

9600 bps

19200 bps

or Interface

(Parallel)

 

 

 

Switch position 3 defines the parity check regulation in serial interface. In Aura, it is selectable between even and none.

Switch position 4 defines the handshaking method in serial interface. When it is set to ON, the printer transmits an “XOFF” for busy and sends an “XON” for not busy. When it is set to OFF, the printer signifies the busy status over hardware signals that can be detected by the host as “DSR” or “CTS”. When parallel interface is used, both switch positions 3 and 4 should be set to OFF.

For switch position 5, if the switch is set to ON, the busy signal is sent to host only when input buffer is full. When it is set to OFF, busy signal is sent to host whenever an off line status occurs. Therefore, signals including the paper near end detect will generate busy signal to the host. Consequently, the printing may be stopped even when there is still a long way to go before the paper roll is actually exhausted. Taking the paper out beep into consideration, the printer will keep on beeping at Paper End (completely no paper) till paper is replaced when S1-5 is ON. Yet when S1-5 is OFF, the printer will keep on beeping every 3 seconds at Paper Near End (still long paper in replace) till paper is replaced.

For switch position 6, when it is set to OFF, there will be a 20

mmpaper feed before cutting when software does not define this point and there will be further 10 mm paper after cutting to prevent paper jam. Before setting this switch to ON, please make sure that your software will take care of enough paper feed for the paper jam prevention issue.

For switch position 8, when it is set to ON in the field, the printer maybe subject to unpredictable damages and must be strictly prevented.

The factory default for each position is listed below:

Part 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Interfaces Aura Series PP-7000-III / PP-7000U-IIIPosition Setup WindowSwitch Definition DescriptionSW Pos Baud rateOr Interface Software Commands Internal SwitchESC ‘p’ m n1 n2 Kitchen bell drive command m = ‘0’, 0 n1 n2 Paper out alarmESC ‘o’ Beep command GS ‘o’ m Beep definition 0 m 16, default 3 secondsCharacter Code Pages Part

pp-7000-III, aura series thermal printer, pp-7000U-III specifications

The POSIFLEX Business Machines PP-7000U-III, part of the Aura Series, represents a significant advancement in thermal printing technology. Designed specifically for high-demand environments such as retail, hospitality, and various business sectors, this printer combines reliability with superior performance, making it an ideal choice for those who need fast and efficient printing solutions.

One of the standout features of the PP-7000U-III is its high-speed printing capability. With a printing speed of up to 250mm per second, it ensures that transactions are processed quickly, reducing wait times for customers. This speed is complemented by a high-resolution print output of 203 DPI, allowing for crisp and clear text and graphics, which is essential for producing quality receipts, tickets, and labels.

The printer employs advanced thermal printing technology, eliminating the need for ink or ribbons, which not only reduces maintenance costs but also enhances overall efficiency. This technology allows for quieter operation, making it suitable for environments where noise reduction is essential.

In terms of connectivity, the PP-7000U-III offers multiple options, including USB, Ethernet, and Bluetooth interfaces. This versatility allows businesses to integrate the printer seamlessly into their existing systems, ensuring compatibility with various point-of-sale software and hardware setups. The inclusion of an easy-to-use, user-friendly interface also makes it simpler for staff to operate and maintain the printer.

The Aura Series printers are known for their robust build quality and durability. The PP-7000U-III is designed to withstand frequent use in demanding environments, featuring a compact design that saves space while maintaining a professional appearance. Its durable casing protects against dust and accidental spills, which can be common in busy settings.

The printer also incorporates advanced features such as an auto-cutter and a paper-saving function, which optimize the printing process and reduce waste. The sensors for paper end and paper near-end alerts help ensure that the printer runs smoothly without interruptions, allowing for continuous operation during peak hours.

In summary, the POSIFLEX Business Machines PP-7000U-III in the Aura Series is a versatile, high-performance thermal printer designed for modern business needs. Its combination of speed, quality, and reliable operation, along with user-friendly features, makes it an excellent choice for retailers and service providers looking to enhance their printing capabilities. The PP-7000U-III is a testament to POSIFLEX's commitment to innovation and quality in the business technology sector.
Top Page Image Contents