POSIFLEX Business Machines CR-2200 user manual Cash Drawer With RS232 & USB Interface CR-2205

power adaptor into the correct power outlet. Insert the output plug to the power jack at rear side of CR-2204 to supply power for drawer kickout.

3). Turn the keylock to standby position.

4). Set the communication protocol of the RS232 port in host system to use baud rate of either 9600 bps or 19200 bps.

Rear View

USB Type B Connector RJ9 (4P4C) modular Jack AC 12V I/P

USB Cable: (21863150800/21863250800)

Connect to USB Port of host system (For CR-2205 only)

Connect to Adaptor

RS232 Conversion Cable: (21863159900/21863259900)

Connect to RS232 port of host system (For CR-2204 only)

CASH DRAWER With RS232 & USB Interface

CR-2205:

1). The drawer number (PID) is default to be 7. Refer to the guidance for “Jumper Setting Change” below if the PID has to be changed.

2). Connect USB type B connector (more or less square one) of USB cable to the USB connector at rear side of CR-2205 and the type A connector end to USB port of host (PC or POS) system as shown in drawing above.

3). Check the specification of power adaptor on its nameplate. Insert the power adaptor into the correct power outlet. Insert the output plug to the power jack at rear side of CR-2205 to supply power for drawer kickout.

4). Turn the keylock to standby position.

5). Install the USB utility driver from Posiflex Product Information CD with Posiflex POS system or visit our web sites http://www.posiflex.com or http://www.posiflex.com.tw or http://www.posiflexusa.com for latest updates.

Switch Setting Change for CR-2204/2205:

1). Use key to open the cash drawer. Take out the removable tray and you

Part 5