Lowrance electronic manual T3 Temperature, Engine Hour Meter, Voltmeter, Setting the LDT-3003

MODE

T3 Temperature

If you have the T3 temperature sensor installed, it appears after T2.This sensor can also be mounted in a live well, on the hull to measure outside air temperature, or just about any other location.

MODE

Engine Hour Meter

This shows the total number of hours the engine has operated. It senses the engine operation from the tachometer. The LDT-3003 must be turned on, however to record engine time. The engine hour meter cannot be reset. (Note: The engine must be running in order to view the hour meter.)

MODE

Voltmeter

The voltmeter shows the current electrical system voltage.

Setting the LDT-3003

The clock can be set to the correct time, alarms can be set to desired time and/or temperature (for each temperature probe), and the temperature displays can be set to °F or °C. The LDT-3003 has a "set" mode that cycles through all of these settings, starting with the clock. To set any of these features, simply press the SET key repeatedly until the desired function appears that you wish to change, then press

the MODE key to change it.

Set Clock The first time the unit is turned on, the clock ap- pears. In this example, 12:00 is showing.To set the clock, first press the SET key once. The colon be- tween the 2 and first 0 begins flashing. Now press the MODE key.The "12" begins flashing with the colon.

5