STEP 5: Cable Installation
Connect L22 breakout cables to the Audio Port and Sync Port as shown below. Signals are assigned as follows: Audio Port provides connections for all analog audio I/O
Sync Port provides connections for digital I/O and clock I/O
L22
CABLE LABELS | AUDIO PORT | |
|
ANALOG OUT 1 | OUT 1 | |
ANALOG OUT 2 | ||
OUT 2 | ||
| ||
ANALOG IN 1 | IN 1 | |
ANALOG IN 2 | ||
IN 2 | ||
|
AES/EBU, S/PDIF IN
DIGITAL IN
SYNC PORT
AES/EBU, S/PDIF OUT
DIGITAL OUT
CLOCK IN
SYNC IN
WORD CLOCK OUT
CLOCK OUT
QUICK START GUIDE
Thank you for purchasing the L22 from Lynx Studio Technology. This document will guide you through the installation process in a few easy steps. For more detailed information refer to the complete L22 manual which is included on the installation CD in PDF format.
Check the contents of the shipping carton. It should include the following:
L22 PCI Card in
L22 Audio Cable – P/N
L22 Sync Cable – P/N
Male and female S/PDIF adapter cables
Installation CD and Registration Card
Accessory cables available from Lynx
TRS and RCA adapter cables used to adapt from XLR connectors on the L22 Audio Cable
Requirements
Windows PC or Macintosh with an empty PCI Slot, CDROM drive, and third party audio software Phillips screwdriver (if necessary for securing PCI card bracket)
Support
If you have questions or comments regarding the operation of your L22 please check the “Troubleshooting” section of the manual and the FAQ and Troubleshooting topics on the support section of the Lynx web site at:
http://www.lynxstudio.com/support.html
NEXT 