Lynx user manual Port Adsl Router Lynx L-325 Version

Page 21

The next step is to configure the Network Address Translation (NAT) settings. For the example, NAT will be enabled. Leave the remaining fields at default and click on Next to continue.

You can configure the DSL Router IP address and Subnet Mask for the LAN interface to correspond to your LAN’s IP Subnet. If you want the DHCP server to automatically assign IP addresses, then enable the DHCP server and enter the range of IP addresses that the DHCP server can assign to your computers. Disable the DHCP server if you would like to manually assign IP addresses. Click on Next to continue.

4-Port ADSL Router Lynx L-325	20
User Manual	20
Version 1.0

Document #: BD-AU0007-10

Image 21

Contents Port Adsl Router Lynx L-325 Port Adsl Router Lynx L-325 Version Snmp Package Contents Safety Instructions-Please readGeneral Information Mode Indication Front Panel ViewLED Description Back Panel View PortConnect the Power Adapter Installing the RouterConnect the Adsl Line and Telephone Connect the PC to the RouterInstallation Diagram Windows Configuring Your ComputerWindows XP Log in to the Router Device Info SummaryWAN Statistics ATM Statistics Port Adsl Router Lynx L-325 Version Adsl BER Test Port Adsl Router Lynx L-325 Version ARP RouteATM PVC Configuration Quick SetupPort Adsl Router Lynx L-325 Version Port Adsl Router Lynx L-325 Version Port Adsl Router Lynx L-325 Version Advanced Setup Port Adsl Router Lynx L-325 Version Connection Type Port Adsl Router Lynx L-325 Version LAN Local Area Network LAN Setup NAT Port Adsl Router Lynx L-325 Version Port Triggering DMZ Host Firewall IP Filtering-Incoming MAC Filtering Port Mapping Port Adsl Router Lynx L-325 Version Quality of Service Routing Static Route DNS Dynamic DNS Adsl DSL Advanced Settings Tone Settings Diagnostics Management SettingsRestore User Settings System Log Snmp Internet Times Port Adsl Router Lynx L-325 Version Access Control Passwords Reboot Router Update Software