Vacuum head set (Accessory)
ACCESSORIES
1
005073
1. Vacuum head
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
1
2
3
003258
1.Dust nozzle
2.Hose of vacuum cleaner
3.Screws
• | Straight & groove forming bits |
• | Edge forming bits |
• | Laminate trimming bits |
• | Straight guide |
• | Templet guide 25 |
• | Templet guides |
• | Templet guide adapter |
• | Lock nut |
• | Collet cone 3/8", 1/4" |
Use the vacuum head for dust extraction. Install the vacuum head on the tool base using the two screws. Then connect a vacuum cleaner to the vacuum head.
• Collet cone 6 mm, 8 mm | |
• | Wrench 8 |
• | Wrench 13 |
• | Wrench 22 |
• | Vacuum head set |
Router bits
Straight bit
005084
MAINTENANCE
CAUTION:
•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
•Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
005116
mm
D |
| A | L 1 | L 2 | |
6 | 20 | 50 | 15 | ||
1/4" | |||||
|
|
|
| ||
12 | 12 | 60 | 30 | ||
1/2" | |||||
|
|
|
| ||
12 | 10 | 60 | 25 | ||
1/2" | |||||
|
|
|
| ||
8 | 8 | 60 | 25 | ||
6 |
| 8 | 50 | 18 | |
1/4" |
| ||||
|
|
|
| ||
6 | 6 | 50 | 18 | ||
1/4" | |||||
|
|
|
| ||
006452 |
|
|
|
| |
8