Magnavox VCRVR402BMG, VR602BMG manual Rerecording Tape Duplication, Helpful Hints

Page 9

32 Rerecording (Tape Duplication)

The instructions on this page show you how to copy tapes. The illustration uses two VR602BMG VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.

1.Audio cables from AUDIO OUT Jacks of VCR 1 to AUDIO IN Jacks of VCR 2

VCR 1

Playing VCR

 

 

 

VCR 2 - Recording VCR

 

 

AUDIO

ANT

AUDIO

ANT

L

 

L

 

IN

 

IN

OUT

IN

 

OUT

IN

 

 

R

 

 

R

 

 

 

 

 

 

 

 

 

VIDEO

OUT

VIDEO

OUT

OUT

IN CH3 CH4

 

OUT

IN

CH3 CH4

 

 

 

 

 

3. RF coaxial cable

 

 

 

2. Video cable from VIDEO OUT Jack

 

from the OUT jack of

 

 

 

 

VCR 2 to the TV’s

 

 

 

of VCR 1 to VIDEO IN Jack of VCR 2

 

 

 

 

 

ANTENNA IN Jack

 

 

 

 

 

Audio and Video cables are not supplied.

1

Make the connections shown above.

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR Light will appear on the dis- play panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press the Number buttons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)

6

Press the SPEED button to select SP or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time.

To stop recording, press the STOP/EJECT button on VCR 1, then press the STOP/EJECT button on VCR 2.

Helpful Hints

If you use the AUDIO and VIDEO IN Jacks on the back of VCR 2, press Number buttons 0, 0, 1 at step 5. AV REAR will appear on the screen.

If you use the AUDIO and VIDEO In Jacks on the front of VCR 2, press Number buttons 0, 0, 2 at step 5. AV FRONT will appear on the screen.

Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

If a program has copyright protec- tion, it may not record clearly.

These instructions show you how to copy tapes using two VCRs like yours. Different VCRs may operate differently.

The VCR in the figure above is the VR602BMG. If you have the VR402BMG, use a single-plug audio cable to connect the AUDIO OUT jack on VCR 1 to the AUDIO IN jack on VCR 2.

Image 9
Contents VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemPlug in the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’dHookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box/Direct Broadcast System cont’dVR602BMG Hookups with a Stereo TVPause Button Front PanelAudio OUT Jacks Rear PanelHelpful Hints Rerecording Tape Duplication
Related manuals
Manual 48 pages 5.02 Kb