Software installation and configuration – only Microsoft Windows operating systems
Users of other operating systems such as Mac OS or Linux can configure their network settings directly using the graphical user interface of the DSL router. This can be accessed via a browser at the following URL: http://192.168.1.1 (password: 1234). The DSL router works with the following browsers: Internet Explorer ® (5.5 or above), Firefox ® (1.4 or above), Netscape ® (7 or above), Opera ® (9.0 or above), Safari ® (1.3.2 or above) or Konqueror ® (3.4.0 or above). Further tips can be found in the O2 DSL Router user instructions on the O2 DSL Starter CD.
5 Insert O2 DSL Starter CD
The O2 DSL Connection Manager is located on the O2 DSL Starter CD and assists you in configuring your network and DSL router.
Preparing for the installation
Switch your computer on and then insert the O2 DSL Starter CD F into the
Note: If installation does not start automatically, you can start it manually by
Tip: Your network can also be configured without the O2 DSL Connection Manager. To do this, all the necessary settings must be configured manually via the user interface of the DSL router (see above – users of other operating systems).
F |
6 Software installation
Select the item »DSL Connection Manager installieren« on the welcome screen. Now follow the instructions given by the installation wizard and confirm each step with »Weiter« or »Fertig stellen«.
Your computer must be restarted after successfully installing the software. When your computer restarts, it will automatically load the O2 DSL Connection Manager configuration wizard, which will guide you
7 Completion of quick configuration
After successfully configuring your network and DSL router, the O2 DSL Connection Manager will start automatically.
This program makes it easier for you to manage your DSL router and your DSL connection. You can directly view and amend the settings of the DSL router using the O2 DSL Connection Manager, as well as implementing error diagnoses.
You can find further information about this in the »DSL Connection Manager« manual on the O2 DSL Starter CD F .
8 Verifying the installation
If the DSL router LEDs are illuminated as shown below, your O2 DSL is ready for use.
If there is more than one Ethernet/LAN connection, the corresponding LEDs also illuminate. You can now surf the internet and make phone calls with the O2 DSL.
Note: If the LEDs are not illuminated as shown, please verify each installation step or call our customer support hotline.
Customer support
Our customer support hotline is available to assist you with the setting up of your O2 DSL Router Classic and for any other questions you may have regarding the full functionality of the DSL router.
Contact our hotline:
•From a landline: dial +49 (0) 18 05. 62 43 57 (o2HELP) – for 14 cents per minute
•If you have an O2 Germany mobile phone contract, call from the O2 Germany mobile phone network on +49 (0) 179. 55 222 – free of charge.
If our hotline is unable to assist you, we will gladly send a service technician to your home at your request.
O2 wishes you hours of happy surfing and DSL telephoning with O2 DSL!
Errors excepted. We reserve the right to make changes at any time. Revised: April 2008.