Numark Industries TT500 specifications Problem

Page 15

Problem

Cause?

Solution

 

Turntable does not turn on.

Disconnected Power Cord?

Connect Power Cord.

 

 

 

The sound level is very low.

The Turntable is not connected to a Connect the device to a preamp DJ

 

device with a PHONO preamp.

mixer or an AV receiver that has an

 

 

input labeled PHONO.

The sound is on one side only.

NOTE:

Static electricity and/or other external interference may cause this unit to malfunction. To reset the unit to its normal condition, turn the power off and then on again. If the problem continues to persist, refer to the connected component's troubleshooting guides. If the problem is not resolved after checking these items, contact the nearest authorized Numark dealer.

The Cartridge is not properly wired. Reconnect the wires from the headshell to the cartridge. See the "Cartridge Setup" section for more detail.

The Stylus is worn out.

Replace the stylus on the cartridge.

 

Replacement styli are available

 

from most Numark Retailers.

The RCA audio cord is damaged.

If the RCA cord is frequently

connected and disconnected, it

 

 

may have become damaged and

 

needs to be replaced.

The Cartridge is not making a

Remove the cartridge, clean the

proper connection.

contacts on the back with Isopropyl

 

Alcohol, and reinsert it.

The Tonearm Tube is not making a

Remove the tube, clean the

proper connection.

contacts on the back with Rubbing

 

Alcohol, and reinsert it.

 

The Tonearm Tube may be

 

damaged. Replace the Tonearm

 

Tube.

The output sound is very distorted. The Cartridge is not properly wired. Reconnect the wires from the headshell to the cartridge. See the "Cartridge Setup" section for more detail.

The Stylus is worn out.

Replace the stylus on the cartridge.

 

Replacement styli are available

 

from most Numark Retailers.

The Target Light glows inconsistently, flickers, or doesn't work at all.

The turntable skips like crazy.

The Target Light Lamp is burning or burned out.

The Turntable is on an unstable surface.

The Tone Arm is not balanced properly.

The Stylus is worn out.

Excessive force is being applied directly down on the platter.

The record is warped.

Replace the entire target light with a compatible part like the Numark TL-1.

Follow the guidelines for installation in the "Setup & Installation" Section.

Follow the guidelines for optimum setup in the "Tone Arm Setup" Section.

Replace the stylus on the cartridge. Replacement styli are available from most Numark Retailers.

Reread the "Operation" section of this manual.

Buy new records.

TROUBLE SHOOTING

PAGE 14

Image 15
Contents Operating Instructions Power Sources Safety Precautions Read InstructionsCleaning AccessoriesReplacement Parts POWER-CORD ProtectionPower Lines Damage Requiring ServiceSetup & Installation Setup Style 2 battle style, scratchingControls 1312 Controls Cable Setup Aligned Platter SetupDo not Overtighten Interchanging Tonearm TubesTone ARM Setup Cartridge Setup Operation Other Important NotesSpecifications Problem Inside the BOX

TT500 specifications

The Numark Industries TT500 is a high-performance turntable that has gained significant attention among DJs and vinyl enthusiasts alike. Renowned for its robust build quality and precision engineering, the TT500 caters to both professional and aspiring DJs looking for a reliable and feature-rich equipment.

One of the standout features of the Numark TT500 is its direct-drive motor. This technology ensures quick start-up times and exceptional playback stability, which are crucial for mixing and scratching in live performances. Unlike belt-driven turntables that can introduce unwanted latency, the direct-drive mechanism provides a more instantaneous response, allowing DJs to execute complex techniques with confidence.

The TT500 also boasts a high-torque motor, delivering rapid acceleration and making it ideal for turntablism. This is complemented by an adjustable pitch control range of ±8% and ±16%, allowing DJs to manipulate the speed of their tracks with precision. The pitch control feature is vital for beatmatching and creating seamless transitions between songs, enhancing the overall performance.

In terms of aesthetics, the Numark TT500 showcases a sleek and modern design with a sturdy chassis. This not only contributes to its durability but also minimizes vibrations that could interfere with sound quality. The turntable is equipped with a heavy platter, which enhances stability and maintains consistent rotation, further ensuring that playback remains smooth.

Another noteworthy characteristic of the TT500 is its user-friendly layout. It features a removable headshell, making it easy for DJs to swap cartridges based on their preferences. Additionally, the turntable includes a built-in phono preamp, simplifying the connection process to various audio systems. This feature is particularly beneficial for DJs who perform in different venues, as it eliminates the need for external equipment.

Furthermore, the Numark TT500 is compatible with industry-standard cartridges, providing versatility for users to choose their preferred stylus for optimal sound quality. The adjustable anti-skate control is another valuable addition, allowing for enhanced tracking and minimizing record wear during use.

In conclusion, the Numark Industries TT500 stands out as a premier turntable designed for DJing and vinyl playback. With its direct-drive motor, high-torque capabilities, adjustable pitch control, and user-friendly features, it delivers an experience that blends technology with performance. Whether for live gigs or home setups, the TT500 has become a beloved choice among DJs seeking reliable, quality equipment.