Common Features:
WAN Protocols
Independent Frame Relay or PPP links Multilink Frame Relay FRF.16.1 MLPPP (RFC1990)
MAC Learning Bridge (IEEE 802.1d) over Frame Relay (RFC2427) or PPP
MPLS VLAN tag transparency and bridging
VLAN 802.1q
Multiple multilink bundles and support of MLPPP / MLFR bundle classes A,B & C
IP Based DiffServ QoS (Optional)
Priority queues (WRR, CBQ), Congestion control (WRED)
Six forwarding classes
(EF, AF1, AF2, AF3, AF4, BE) Traffic metering
Multifield classifier (Src/Dest IP address, protocols, and applications ports)
Frame Relay
LMI: ANSI (Annex D), ITU (Annex A), and FRF Rev 1.0
Routing Protocols Static routing
RIP1, RIP2, OSPF, optional
IP Fast Forwarding DHCP server, DHCP relay IGMPv3, IGMP proxy,
Security and Management Classless IP addressing
NAT (1:1), NAPT (overloading, port translation)
Stateful Packet Inspection designed for ICSA compliance
Radius Authentication, Secure Shell (SSH) Router Command Line Interface (CLI)
Performance Monitoring
Ethernet Interface 10/100 Base T Connector:
Local Management
RS232C COMM Port (VT 100 emulation) Connector:
Remote Management
Telnet
Service Level Agreement Verification
Frame Relay SLA FRF.13 compliant:
Frame Delivery Ratio (FDR),
Data Delivery Ratio (DDR),
Frame Transfer Delay,
Service Availability
Physical
Dimensions: 1 RU, rack mountable
43.69cm (17.2 in ) W, x 40.64 cm (16 in) D, x 4.45 cm (1.75 in) H
Weight: 5.45 kg (12 lbs.)
Power Requirements
Voltage: 100 VAC to 240 VAC,
Consumption: 30W maximum
Model Specific Features:
Model
Network Interface
Ports
Line Rate
Connector Type
Line Code
Framing
Output Level
Input Level
System Timing
Regulatory
Diagnostics
Loopback Tests
Loopback Control
Test Patterns
Network Alarms
Bantom test jacks
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Maximum Altitude
5842/5844 T
2xT1 ANSI T1.403 ports, max. 4xT1 T1 (1.544 Mbps ± 50 bps)
100 ohm
ESF
0 db,
T1 Network, internal, external T1 source
FCC Part 15, FCC Part 68, UL 1950 Third Edition, Industry Canada
T1 network, T1 payload, fractional T1 payload,
T1 set/reset codes, ESF FDL per AT&T 54016 and ANSI T1.403 Annex B
1:1, 1:2, 1:4, 1:7, 3:24, QRW, all 0s, all 1s, two
Loss of signal, loss of frame, remote alarm
indication, alarm indication signal, CRC6, BPV,
OOF
Power/test, network line status, network
loopback, loopback acknowledge, IP address, SW version level
0º - 50º C
0 - 95%
4.6 Km (15,000 ft)
5842/5844 E
2xE1 G.703 ports, max. 4xE1 E1 (2.048 Mbps ± 50 bps)
120 ohm
E1 Network, internal, external E1 source
European harmonized standards 73/23 EEC, 91.31/EED, 89/336/EED, 93/68/EEC, and 91/263/EEC; UL 1950 3rd Ed.; CAN/CSA C22.2 No.
E1 network, E1 payload, fractional E1 payload,
E1 set/reset codes
1:1, 1:2, 1:4, 1:7, 3:24, QRW, all 0s, all 1s, two
Loss of signal, loss of frame, remote alarm indication, alarm indication signal, CRC4, CV, FE
Power/test, network line status, network loopback, loopback acknow- ledge, IP address, SW version level
Not applicable
0º - 50º C
0 - 95%
3.05 Km (10,000 ft)
Headquarters
Quick Eagle Networks (USA)
830 Maude Avenue
Mountain View, CA 94043
+1
+1
info@quickeagle.com
www.quickeagle.com
Northern, Central & Eastern Europe
info_uk@quickeagle.com
Southern Europe, Middle East & Africa
info_france@quickeagle.com
Asia / Pacific Rim info_apac@quickeagle.com
Latin, Central & South America
info_southamerica@quickeagle.com
Canada
info_ca@quickeagle.com
© 2007 Quick Eagle Networks. All rights reserved. PDF07/07
The information presented herein may change without notice and should be used for informational purposes only. 5840 Multiport Router, 5842 Multiport Router, 5844 Multiport Router, and 4335 Access Router are trademarks of Quick Eagle Networks.