Telephone Level switch, Tone dialing | Konexx MOBILE KONNECTOR

♦Weak batteries can cause transmission difficulties. Replace the batteries after 15 hours of use (40 hours for alkaline batteries).

Telephone Level switch

Make sure the Telephone Level switch is set properly. Otherwise, you will hear buzzing or squelching feedback through the modem speaker when the modem is off-hook, which will adversely affect transmission and reception. For information on using this switch, refer to the switch setting section and Table 3-1.

Tone dialing

Make sure your modem, fax/modem, or fax machine is configured for Tone (DTMF) dialing. Your Mobile Konnector will not work with pulse (rotary) dialing.

The manual that came with your modem, fax/modem, or fax machine should describe this procedure.

V.34/V.90 Connections

Although your Mobile Konnector is V.34/V.90 compatible, not everyone can get consistent connections at 28,800 or higher. In fact, V.34/V.90 connections at 26,400, 24,000, and 21,600 are common.

The connect rate speed will be determined by the phone system's capabilities, your modems capabilities, and the quality of the phone line. When using the Mobile Konnector, your connection is going through a digital phone system which was not designed for data connections. This means your connection rates will be lower then you are use to when connecting to an analog phone line.

Speakerphones

Make sure the telephone handset is removed from the cradle until you finish exchanging data. Hang up your modem or fax/modem to reactivate the handset.

If the telephone has a speaker, the speaker must be turned off. Speakerphone operation disables the telephone handset jack that your Mobile Konnector uses to transmit and receive data. The handset must be removed from its cradle.

Princess and Trimline telephones

Your KONEXX Office Konnector will not operate with "Princess" or "Trimline" telephones, which have the keypad in the handset. The electronics with which the Mobile Konnector interacts are not accessible in these telephones.

Hanging up the modem

Your Mobile Konnector disconnects the telephone handset when your modem or fax/modem is "on-line". After data transactions or when autodialing voice calls, use your communications software to hang up your modem so that the handset is reactivated.

You can either use the call-termination feature in your communication software, or type ATH0 and press Enter from direct connect mode. The manual that came with your software should describe how to hang up the modem.

"No Dial Tone" error message

If you receive a "No Dial Tone" error message, include the Hayes command ATX1 or ATX3 in your modem Dial command. These commands tell your modem or fax/modem to dial without first listening for a dial tone.

Some telephone systems (such as Rolm) do not use the standard dial tone, and your modem or fax/modem may not recognize the nonstandard tone as a dial tone.

MOBILE KONNECTOR specifications

Konexx has introduced the Mobile Konnectors, a revolutionary solution designed to enhance connectivity and productivity in a mobile environment. These portable charging stations are specifically engineered to meet the demands of users on-the-go, making them ideal for professionals, outdoor enthusiasts, and anyone who relies heavily on mobile devices.

One of the standout features of the Mobile Konnectors is their robust and versatile charging capabilities. They are designed to accommodate multiple devices simultaneously, including smartphones, tablets, laptops, and other USB-powered gadgets. Equipped with high-speed USB ports, the Konnectors can deliver rapid charging without compromising on safety. This ensures that devices are charged quickly, allowing users to stay connected and productive even in the most demanding situations.

In terms of technology, the Mobile Konnectors leverage advanced battery management systems to optimize charging efficiency and extend battery life. This intelligent technology prevents overcharging and overheating, providing peace of mind while charging devices. Moreover, the connectors are built with durable materials, offering resilience against environmental factors. These rugged features make them suitable for outdoor use, whether during camping, hiking, or other outdoor activities.

The design of the Mobile Konnectors prioritizes portability and ease of use. They are lightweight and compact, allowing users to easily carry them in a backpack or travel bag. Furthermore, with a user-friendly interface, anyone can quickly understand how to use the device without needing extensive technical knowledge.

A unique characteristic of the Konexx Mobile Konnectors is their compatibility with various operating systems, making them an excellent choice for diverse users, from tech-savvy individuals to those less experienced with mobile technology. They seamlessly connect to both iOS and Android devices, as well as other platforms, ensuring a wide user base.

Additionally, the Mobile Konnectors come equipped with LED indicators that provide real-time information on battery status and charging progress. This feature allows users to monitor their devices at a glance, ensuring they are never left in the dark about their power source.

In conclusion, the Konexx Mobile Konnectors are an essential accessory for anyone who requires reliable and efficient mobile charging solutions. With their cutting-edge technology, combined functionality, and user-friendly design, they are poised to become a favorite among mobile users everywhere. Whether for work, travel, or recreational activities, the Mobile Konnectors by Konexx ensure you stay powered up and connected at all times.