Leupold B17CL Power management system, Connection to your computer, System Flexibility

Introduction

System Flexibility

Equipped with DDC1, DDC2B and DDC2Bi for Plug & Play compatibility.

Monitor is compatible with VGA, SVGA, VESA and high resolution video modes up to 1600(H) 1200(V) @ 75Hz

Monitor may be used with IBM or compatible PC, MAC.

Automatic universal power supply is built in permitting AC power input of 100 - 240V AC, 50 or 60Hz.

Self-test menu allows the display unit to be checked on screen without connecting to a computer.

Compact case minimizes desktop space giving you a large screen image without loss of workspace.

Power cable included easily plugs into a standard outlet.

Power management system

This monitor complies with VESA, Nutek, and Energy Star power saving requirements. The power saving system works only when used with VESA DPMS compliant PC’s and/or graphic controllers.

State	LED	Power	Recovery Time
On	Green	Normal (85 Watts)	N/A
Stand by	Green	65 Watts	2 Sec
Suspend	Amber	15 Watts	5 Sec
Off	Amber/Blink	5 Watts	15 Sec

Installation

Connection to your computer

CAUTION

Ensure that both the PC and the display monitor are switched off.

To attach the monitor to your system, as shown in the following illustrations.

1. Insert the AC power cord	into monitor
and then into an AC power outlet.
2. Connect the signal cable	to the 15pin

graphics connector of the system and tighten the fastening screws.

3. To turn on the monitor, push the power switch.

Note : To attach the monitor to the Macintosh system, please contact an authorized dealer.(Need to use a special adaptor)

Pin assignment table D-Sub Mini 15pin connector

ENGLISH

The monitor goes into various power saving stages depending on the incoming
video signal as shown in the following table
State	Horizontal Sync	Vertical Sync
On	On	On
Stand by	Off	On
Suspend	On	Off
Off	Off	Off

Note

The monitor automatically goes through the DPMS steps when it is idle.

To release the monitor from the DPMS condition, press any key on the keyboard or mouse.

	Pin No.	Assignment
	1	Red Video
2		Green Video
3		Blue Video
4		Frame Ground
5		Ground

6Red Video Ground

7Green Video Ground

8Blue Video Ground

9	N.C
10	Sync. Ground
11	Ground
12	SDA
13	H-Sync.
14	V-Sync.
15	SCL

The 15-pin D-Sub connector (male) of the signal cable (IBM Systems) :

1 5

610

11 15

(15 Pin D-Sub)

6 User’s Manual

User’s Manual 7