La Crosse Technology WT-2191A instruction manual

Page 12

the “ALM1” or “ALM2” key once, depending on which alarm needs to be activated.

C. When the alarm is sounding, pressing the “SNOOZE” will turn it off for the time that was selected in the programming mode (section II.A.2.c.). The snooze is activated by pressing back on the entire unit while the cover is open. The actual button is on the bottom of the unit and is pressed by the cover when pushed back. If the setting is “0”, the alarm will turn off for 24 hours. During the snooze period, the lower screen will show a countdown until the alarm will sound again. If the snooze bar is pressed again during the original snooze period, the period will be reset. Once the period is finished, the alarm will sound again. Pressing any key other than the snooze key will turn off the alarm for 24 hours.

10

Image 12
Contents Model WT-2191 Radio-controlled Travel Alarm Clock Table of Contents Inventory of Contents OpenQuick Setup Detailed Setup Guide Battery Installation II. Programming A. Setting the Time About Radio Controlled Time signal, Wwvb Programming includes manual time setting Page Programming Sequence III. Setting the Alarms Page IV. Operating Screens Alarm 1 Time Alarm 2 Time TravelingTroubleshooting Maintenance and Care Instructions Specifications Warranty InformationSupport@lacrossetechnology.com