Troubleshooting

POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER

The outdoor temperature transmitter can be mounted in two ways:

•with the use of screws, or using the adhesive tape.

MOUNTING WITH SCREWS

1)Remove the mounting bracket from the outdoor temperature transmitter.

2) Place the mounting bracket over the desired location. Through the three screw holes of the bracket, mark the mounting surface with a pencil.

3)Where marked, start the screw holes into mounting surface.

4) Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket.

MOUNTING WITH ADHESIVE TAPE

1)With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat.

2)Remove the protective strip from one side of the tape. Adhere the

tape to the designated area on the back of the mounting bracket.

3)Remove the protective strip from the other side of the tape. Position the outdoor temperature transmitter in the desired location, ensuring that the atomic clock can receive the signal.

Problem:	The LCD is faint.
Solution:	1)	Replace the batteries.
Problem:	No reception of WWVB signal
Solution:	1)	It may help reception to face the front of the atomic clock in the general
		direction of Ft. Collins, Colorado.
	2)	Wait overnight for signal.
	3)	Be sure the atomic clock is at least 6 feet (2 meters) from any electrical
		devices, i.e. TV sets, computers, or other radio controlled clocks.
	4)	Remove batteries for five minutes, reinsert and leave the unit alone
Problem:		overnight without pressing any keys.
Problem:	Hour is incorrect (minute and date are correct).
Solution:	1)	Be sure the correct time zone and daylight saving time are selected.
Problem:	"OFL“ appears in the indoor temperature section of the LCD
Solution:	1)	Move the atomic clock to an area with warmer or cooler surrounding
		temperature. Current surrounding temperatures are outside measuring
Problem:		range.
Problem:	"--.-" appears in the outdoor temperature section of the LCD.
Solution:	1)	Remove the batteries of both units for one minute, then reinsert them
		again. Make sure the batteries are new and fresh.
	2)	Move the atomic clock closer to the transmitter or place the transmitter
		closer to the atomic clock. Make sure the clock is at a receivable range
		from the transmitter.
	3)	Move the units to another location. Interferences from other electrical
		devices operating on the same signal frequency (433MHz) may prevent
Problem:		correct signal transmission and reception.
Problem:	"OFL“ appears in the outdoor temperature section of the LCD.
Solution:	1)	Wait until the current surrounding temperature cools down or increases.
		Current temperature is outside of the measuring range of the transmitter.
		The outdoor temperature will be displayed again once the current
		surrounding temperature is within the range of the transmitter.

WS-8117 specifications

La Crosse Technology WS-8117 is a sophisticated weather station designed for both amateur meteorologists and everyday users who want to keep track of weather conditions in their immediate surroundings. This weather station is packed with features that make it a valuable tool for monitoring a variety of environmental parameters.

One of the standout features of the WS-8117 is its ability to measure indoor and outdoor temperatures as well as humidity levels. Equipped with a wireless sensor, it can transmit data from outdoor locations to the display unit located indoors, allowing for real-time tracking of weather conditions without the need for cumbersome wiring. The device has an impressive range, typically up to 300 feet, depending on environmental factors.

The WS-8117 offers a comprehensive set of weather information, including a detailed forecast for the next 12 to 24 hours based on barometric pressure trends. This feature helps users anticipate changing weather conditions, making it easier to plan outdoor activities. The weather station also sports a colorful LCD display that displays current weather data, forecast icons, and historical records in an easy-to-read format.

Another notable characteristic of the WS-8117 is its ability to record and store historical data. Users can view daily highs and lows for temperature and humidity, enabling them to analyze patterns over time. This feature is particularly useful for those interested in tracking seasonal changes or understanding local climate behavior.

The WS-8117 also boasts a sleek design, making it an attractive addition to any home or office environment. It includes a stand for tabletop use but can also be mounted on a wall for better visibility. Furthermore, the unit runs on batteries, providing the convenience of portability without requiring a continuous power supply.

La Crosse Technology has incorporated rugged design elements into the WS-8117, ensuring durability and reliability. The outdoor sensor is weather-resistant, capable of withstanding various environmental conditions, thus ensuring accurate readings year-round.

In conclusion, the La Crosse Technology WS-8117 is an excellent choice for anyone interested in personal weather monitoring. With its wireless sensors, easy-to-read display, and comprehensive weather data features, it provides a wealth of information right at your fingertips. Whether you're a casual user or an enthusiast, the WS-8117 offers a reliable way to stay informed about the weather.