Vienna Acoustics Waltz Grand Series owner manual Accessories in Paper BOX, Mounting

ACCESSORIES IN PAPER BOX

Wall mounting device: 1 pc. for on-wall application.

Knurled screws: 2 pcs.

for connecting the cabinet with the wall mounting device.

Banana plugs: 2 pcs.

for connecting the speaker cables.

Teethed washer: 2 pcs.

must be used to prevent loosening of the knurled screws.

American wall mounting screws plus wall mounting anchors: 2 pcs.

European wall mounting screws plus wall mounting anchors: 2 pcs.

Transparent rubber feet: 4 pcs. for stand alone application only!

for protection of the cabinet-bottom, if not wall mounting.

MOUNTING

￿After placing the wall-mounting anchor into the wall, fix the wall-mounting device with the wall mounting screws.

ATTENTION:

Use the inner, longer hole of the wall-mounting device for vertical positioning. Use the outer, round hole just for center position (horizontal positioning).

Center position (horizontal)

Vertical positioning

guide ways

￿Put the teethed washer on the knurled screws.