Proview P6NS Series Operation Adjusting Value Preset, Background, White, Balance, Other, Function

ITEM

Program Menu.

﹟Test Meter ﹡Test Point ﹫Pattern

Operation

Adjusting

Value

	Preset		Four key model :		Other adj. :
	Adjust		Step 1 : Press and relese the OSD control knob to		Best Point
			activate the OSD menu.
			Step 2 : Press +/▲or -/▼key to highlight the desired
C			option of OSD icon.
			Step 3 : Press and release MENU key to acress the
			option.The color of the inner area of the
			OSD will changed from blue to green.
			Step 4 : To make your adjustment,press +/▲or
			-/▼key to decrease the setting.
			Step 5 : Press and release MENU key to store
			the change.the color of the inner area will
			go back to blue.You can select select other
			function to make adjustment by +/▲or -/▼
			.Also you can select exit icon or press Exit
			key to exit the OSD menu.
	Background	﹟Color Analyzer	1. Set the contrast to MAX.,Brightness to Y=0.7		Y = 0.7
	White	﹫R.G.B off	set color is 9300°K using the OSD.		±0.1FL
D	Balance	(68KHz,1024x768)	2. Set the OSD to COLOR of sub menu and press		x = 0.283
	Adjust		knob.		±0.01
			3. Make the adjustment R.G.B BIAS low light to		y = 0.297
			the value shown at right by using encorder.		±0.01
	White	﹟Color Analyzer	1. Move the OSD to the R.G.B. DRIVE.		37VP-P
	Balance	﹟Oscilloscope	2. Move the OSD to the G DRIVE and make the
E	Adjust	﹡Cathode G	adjustment to the value shown at right by using
		﹫3” block	encorder.		x = 0.283
			3. Move the OSD to the R,B-DRIVE and make the
		(68KHz,1024x768)
			Adjustment to the value shown at right by using		±0.01
			Encorder.		y = 0.297
					±0.01
F	ABL	﹟Color Analyzer	1. Set the contrast to MAX.,Brightness to MAX.		Y = 33FL
	Adjust	﹫Full White	2. Make the adjustment to the value shown at right
		(64KHz,1280x1024)	by adjustment ABL on the OSD menu.
	Other	﹫Full White	1. Set the FREQ. to 55 (562NS)
	Function	(64KHz,1280x1024)	72 (777NS,772NS,572NS)
	Seting		87 (786NS,787NS,986NS)
G			2. Set the OSD to PROVIEW
			3. Set the BURN to Disable
			4. Set the TIME to 15
			5. Set the DEFO to TDA9113/9112 (786NS,787NS,986NS)
			TDA9115	(772NS,572NS,562NS)

12