Loading Ribbon Cartridge
Ribbon
Ribbon
Cartridge
Tab (2)
Ribbon Tension
Knob
TOF
F OT
TOF
OFT
183871a
| Air Shroud |
Tab Slot (2) | Assembly |
Figure 2. Installing the Ribbon Cartridge
4.Remove the ribbon slack on the ribbon cartridge by turning the ribbon tension knob clockwise.
CAUTION Do not turn the ribbon tension knob counterclockwise. This could damage the ribbon cartridge.
5.Hold the cartridge at an angle, so that the rear side nearest you is lower than the side with the ribbon. Find the two tabs on the outside of the cartridge and place them into the corresponding slots on the air shroud assembly (see Figure 2).
9