Signal Connections, Connecting Loudspeakers

3: Input & Output Connections

FUSE HOLDER

MAINS	RIGHT	LEFT	POWER
MAINS			POWER
INPUT	LOUDSPEAKER TERMINALS		AMPLIFIER
			INPUT

PRE-

AMPLIFIER OUTPUTS

VCR

TAPE 2 TAPE 1 CDR,ETC

AUX CD, DVD

Signal Connections

CD, TUNER, AUX, VIDEO IN, TAPE 1 IN, TAPE 2 IN

The six inputs may be used for connecting any line level source.

VIDEO OUT, TAPE 1 OUT, TAPE 2 OUT

Three sets of record outputs for connection of up to three stereo audio recorders, e.g. tape recorder, CD recorder, audio recording input of VCR ,DVD, MP3, MiniDisc recorder, etc.

PRE-AMP OUT 1 & 2

Low impedance (100 ohm) pre-amplifier outputs for driving external power amplifiers, sub-woofers or signal processors. Long cables may be used if required. Pre-amp outputs are switched off when integrated mode is selected or whenever amplifier is muted.

POWER AMP IN

For driving the power amplifier input directly from an external source. Only operates when pre power AV mode is selected.

LOUDSPEAKER TERMINALS

Two sets of loudspeaker output terminals connected in parallel.

GROUND

Use only if phono pre-amplifier and turntable are used and both are Class II double insulated (no earth connection). In this case the ground terminal can be connected to the metalwork of these units to eliminate residual hum. The ground terminal must not be used as a safety earth. If in doubt consult your dealer.

Standard Loudspeaker Connection

You can connect a speaker switching box or headphone adaptor to the unused set of speaker terminals

Bi-Wired Loudspeaker Connection

Loudspeaker bi-wiring offers improved sound quality because high and low frequency signals are carried individually to the loudspeaker drive units.

Connecting Loudspeakers

Switch power off when connecting loudspeakers. Use good quality low resistance loudspeaker cable. Connect the Positive RED (+) terminal of the amplifier to the Positive (+) RED terminal of the loudspeaker. Connect the Negative (-) BLACK terminals similarly.

When connecting loudspeakers tighten the terminals securely by hand.

Make there are no loose strands of wire which could cause shorts.

Speaker

Cables

RED

BLACK

Connecting

Cables

4: Operation

Operating Modes

Although the 8000S is an integrated amplifier, it can function as a separate pre-amplifier and power amplifier. This allows the unit to be used in a variety of stereo and multichannel modes.

NOTE: When switching modes, the making and breaking of connections may momentarily operate the muting function on the 8000S.

Integrated Mode

The pre-amplifier section is internally connected to the power amplifier. Pre-amp outputs are not operational. External subwoofers, processors, or amplifiers will not receive any signal.

Pre-Power Mode

The pre-amplifier section is internally connected to the power amplifier. The pre-amplifier outputs are operational.

A powered subwoofer can be connected to the pre-amplifier outputs

A second power amplifier can be connected for bi-amplifying as shown in the diagram.

An additional power amplifier can also be connected to drive a second pair of speakers in a remote location.

Pre Mode

All signals to and from the power amplifier of the 8000S are disconnected. In this mode, the 8000S functions as a stand-alone pre-amplifier.

The pre-amplifier section of the 8000S can be connected to a stereo power amplifier, or to two monobloc amplifiers .

Pre-Power AV

The pre-amplifier and power amplifier sections operate independently. This mode can be used to connect a multichannel AV processor.

The processor should be connected via any spare tape output or, as an alternative, one of the pre-amp outputs.

Switching On

Make sure all the connections to and from the amp are secure and correct. Make sure the operating mode is correctly set.

Plug the power cord into the wall socket and the amplifier. Switch on at the mains and then switch on the 8000S. The power indicator lights. The unit is operational. The amplifier may be operated via the front panel or the remote handset.

NOTE: Selecting MUTE from the front panel will disable the mute function on the handset. To restore normal operation, select an operating mode.

8000S specifications

The Wharfedale 8000S is a prominent speaker model that exemplifies the brand's commitment to delivering high-quality audio performance. Known for its exceptional sound reproduction and build quality, the 8000S is a popular choice among audiophiles and casual listeners alike.

One of the standout features of the Wharfedale 8000S is its advanced driver technology. The speaker utilizes a combination of a meticulously designed woofer and a high-frequency tweeter. The woofer is constructed with robust materials that ensure deep bass response and clear midrange frequencies. Meanwhile, the tweeter is engineered to deliver crisp, detailed highs, allowing for an expansive soundstage. Together, these drivers create a balanced audio output that captures the nuances of various musical genres.

The Wharfedale 8000S is also recognized for its impeccable cabinet design. The enclosure is crafted to minimize resonance and distortion, which is crucial for maintaining audio fidelity. The cabinet features a sleek, stylish finish that complements modern interiors while housing the speaker components securely. This attention to detail in the construction contributes to the speaker’s durability and longevity.

In terms of connectivity, the 8000S is equipped with versatile input options that accommodate various audio sources, making it an ideal choice for both home theater setups and traditional hi-fi systems. This adaptability ensures that users can enjoy their favorite music and movies with remarkable clarity and precision.

Moreover, the Wharfedale 8000S incorporates advanced acoustic technologies, including bass reflex design. This technology enhances low-frequency performance, allowing the speaker to deliver powerful bass without sacrificing overall sound quality. The result is a more immersive listening experience, whether you're enjoying classical symphonies or contemporary rock.

Another appealing characteristic of the 8000S is its efficiency, allowing it to be driven effectively by a wide range of amplifiers. This feature makes it accessible to listeners with different setups, ensuring that the speaker can adapt to various audio environments while delivering consistent performance.

In summary, the Wharfedale 8000S stands out for its high-quality drivers, superior cabinet construction, versatile connectivity, and innovative acoustic technologies. It is a speaker designed for those who prioritize excellent sound and are looking for a product that enhances their audio experience, making it a worthy addition to any sound system.