Q-See QSW1001R technical specifications NTSC/PAL Setup, Exit Setup

Page 8

NTSC/PAL Setup

(1) Press MENU to enter system main menu.

(2)Press LEFT/RIGHT to setup option, then press OK to confirm.

(3)Press LEFT/RIGHT to NTSC/PAL option, then press OK to confirm.

(4)Press OK to switch to PAL mode (default is NTSC mode).

(5) Press OK again to switch to NTSC mode.

(6) Press LEFT/RIGHT to Exit option then press OK to exit..

Exit Setup

Press MENU to exit directly.

8

Image 8

Contents Table of Contents Special Attention Introduction to Unit’s FunctionsRange of Applications Packing ListProduct Model QSW1001R Top of PVRFront Cover Back CoverSD Card Information SD Card CautionConnection Diagram Image setupDate/Time Setup Record AVI/Photo Setup Photo/AVI quick setupNTSC/PAL Setup Exit SetupImage Quality Setup Motion Detection Quick Setup Motion Detection ON/OFFMotion Detect Off Motion Detection AreaMotion Detection Count Motion Detection Interval Motion Detection Sensitivity Playback Mode Image playbackBrowsing Pictures Browse Six PicturesDeleting Images Delete One Using six thumbnail browseChoose Folder Delete All FormatSee Product Warranty User’s Name Mr./Mrs