ResMed 248127 user manual Stopping Treatment, Using the HumidAire 2i Warm-Up Feature

Page 21

Stopping Treatment

To stop treatment at any time, remove your mask and press the Front key

or

if your clinician has enabled the SmartStart function, simply remove your mask and treatment will end (SmartStop is not applicable with the "Mir Full" mask setting).

Using the HumidAire 2i Warm-Up Feature

If using a HumidAire 2i with the VPAP, you can use the Warm-Up feature to pre-heat the water in the humidifier prior to starting treatment.

After stopping treatment, the VPAP will continue to blow air gently to assist cooling of the heater plate.

See the HumidAire 2i User’s Manual for further details.

Using the Mask-Fitting Feature

The VPAP Mask-Fitting feature can be used to help you fit your mask properly. The mask-fitting feature delivers air pressure for a three-minute period, prior to starting treatment, for checking and adjusting your mask fit to minimise leaks. If a Ramp time is selected, the mask can be adjusted at a pressure closer to the prescribed pressure. To use the mask-fitting feature:

1.Fit your mask as described in the user instructions.

2.Hold down the Front key for at least three seconds until air pressure delivery starts.

The following display will appear on the LCD screen indicating that the Mask-Fitting feature is in operation. The flow generator will ramp to the Mask-Fit pressure and will remain at this pressure for three minutes. A Mask-Fit star rating is also displayed. See “Definitions of Mask-Fit Star Rating” on page 15.

Mask Fit

*****

 

 

Mask-Fit Star rating

 

 

excelnt

 

 

 

 

 

 

 

 

Notes:

•The Mask-Fit star rating display disappears after three minutes.

•The Mask-Fitting feature can only be started from the VPAP (or Ramp) screen.

•The Mask-Fit pressure is the set treatment pressure or 10 cm H20, whichever is greater.

3.Adjust your mask, mask cushion and headgear until you have a secure and comfortable fit.

14

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 248127/1 05 Illustrations 52 cm 3 m English Manufactured by Contents Limited Warranty Index Medical Information IntroductionUser/Owner Responsibility What the Vpap III and Vpap III ST are Intended forPage Medical Information Adverse EffectsPage Masks Vpap SystemHumidifiers AccessoriesSetting up the Vpap System Setting Up The VpapAttaching a Humidifier Attaching a HumidAire 2i Humidifier Attaching a HumidAire 2iC HumidifierAttaching a HumidAire Humidifier Attaching a Passover Humidifier LCD Screen Using the LCD Screen and KeypadKeypad Keys KeyFunction FrontRight red Key Function Left greenPage Starting Treatment Ramp timeStarting Treatment Using the HumidAire 2i Warm-Up Feature Using the Mask-Fitting FeatureStopping Treatment High Leak Page Daily Cleaning Cleaning and MaintenanceWeekly Cleaning Periodic CleaningServicing Replacing the Air FilterHow to Use the Vpap Menus How to Use the Standard MenuRamp Screen To exit out of the menu Press the Right key exit How to Use the Detailed Menu if enabled by your clinicianVpap Detailed Menu Series if enabled by your clinician Settings Menu Menu Functions Detailed menu onlyTo enter a submenu Press the Left key enter Settings for mask types Mask Function Default Function Description Setting OptionsSettings Mask Results Menu Function Function Description Setting OptionsResults Menu Servicing Menu Options MenuTreatment screen Treatment ScreensHow to Use the Vpap Menus Page Helpful Hints Using a Battery and an InverterStarting out Nasal IrritationPage Troubleshooting TroubleshootingCheck tube Key if done Problem Possible Cause SolutionLast session Page Dynamic pressure characteristics System SpecificationsFlow sensor in flow generator IEC 60601-1 ClassificationsPressure Variation Pressure Volume curvePressure cm H2O BreathsEnvironmental information Symbols which appear on the productEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Limited Warranty Product Warranty PeriodLimited Warranty Page Index

248127 specifications

ResMed 248127 is a state-of-the-art device designed to enhance patients' experience in managing sleep apnea and other respiratory conditions. As a leader in innovative technologies, ResMed continues to focus on developing equipment that promotes better sleep and overall health.

One of the key features of the ResMed 248127 is its advanced integrated monitoring capabilities. This device provides real-time data on various parameters that are crucial for effective therapy management. Patients and healthcare providers can easily access important information, such as adherence rates and overall treatment effectiveness. This transparency helps to ensure that users remain compliant with their prescribed therapies, which is essential for achieving desired outcomes.

The ResMed 248127 also features a user-friendly interface with an intuitive design. The device is equipped with a high-resolution display that presents information clearly, making it easier for users to navigate through different settings and options. This simplicity is particularly beneficial for older adults or those who may not be technologically savvy, allowing for an efficient user experience without overwhelming the patient.

Another standout characteristic is its whisper-quiet operation. Sleep therapy devices often come under scrutiny for their noise levels, which can disrupt sleep patterns. The ResMed 248127 addresses this concern by utilizing advanced sound dampening technologies that ensure a peaceful night's sleep, creating a harmonious environment for both the patient and their sleep partner.

The device also incorporates SmartStart technology, which automatically starts or stops therapy as soon as the mask is put on or removed. This functionality not only enhances the convenience of use but also ensures that therapy is delivered effectively and promptly as needed.

Furthermore, the ResMed 248127 is designed with portability in mind. Its lightweight and compact design make it easy for users to transport the device, facilitating therapy adherence even while traveling. This flexibility allows patients to maintain their treatment regimen when they are away from home, ensuring that sleep quality is preserved regardless of location.

In conclusion, the ResMed 248127 combines innovative technology, user-friendly features, and unmatched portability to provide users with an effective solution for managing sleep apnea and other respiratory conditions. Its advanced monitoring capabilities, quiet operation, and convenience-oriented design make it a valuable tool in the quest for better sleep health. This device demonstrates ResMed's commitment to improving patient outcomes through technological advancements in the realm of sleep therapy.
Top Page Image Contents