Juice Series Speciﬁcations

Continuous Sine Wave Average Output Power for each channel with both channels driven, 20 Hz to 20 kHz

	J•800	J•1400	J•2500
2 ohms:	480 W	800 W	1400 W
4 ohms:	300 W	450 W	750 W
8 ohms:	205 W	310 W	575 W

Bridged Mono Operation, 20 Hz to 20 kHz

	J•800	J•1400	J•2500
4 ohms:	800 W	1400 W	2500 W
8 ohms:	560 W	900 W	1500 W

Note: Power ratings are speciﬁed at 120 VAC line voltage.

Subsonic Filter

– 9 dB @ 30 Hz

Topology

J•800, J•1400:	Class AB
J•2500:	Class H

Cooling

Dual variable-speed fans with back to front airﬂow

Indicators

Channels A and B

SIG (Signal Present), OL (Overload)

POWER

Power Bandwidth

5 Hz to 50 kHz (+0, –3 dB)

Frequency Response

25 Hz to 25 kHz (+0, –1 dB)

Distortion

THD and SMPTE IMD; 20Hz to 20kHz < 0.03% @ 8 ohms

Signal-to-Noise Ratio

> 100 dB below rated power into 4 ohms

Channel Separation

> 90 dB @ 1 kHz

Damping Factor

> 300 @ 1 kHz and below

Input Impedance

20 kΩ balanced

10 kΩ unbalanced

Input Sensitivity

1.15 V (+3.4 dBu) for rated power into 4 ohms

Current Consumption

	J•800	J•1400	J•2500
Idle	0.5 A	0.5 A	1.0 A
Musical Program @ 8Ω	3.9 A	5.1 A	8.1 A
Musical Program @ 4Ω	5.0 A	6.7 A	10.0 A
Musical Program @ 2Ω	7.0 A	10.6 A	17.2 A

AC Power Requirements

U.S.	120 VAC, 60 Hz
Europe	240 VAC, 50 Hz
Japan	100 VAC, 50/60 Hz
Korea	220 VAC, 60 Hz

Physical Dimensions and Weight

Height:	3.5 in/89 mm
Width:	19.0 in/483 mm
Depth:	15.7 in/400 mm
Weight:
J•800:	43.6 lb/19.8 kg
J•1400:	48.5 lb/22.0 kg
J•2500:	56.2 lb/25.5 kg

Disclaimer

Since we are always striving to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these speciﬁcations at any time without notice.

Gain

J•800:	30 dB
J•1400:	32 dB
J•2500:	34 dB

Maximum Input Level

9.75 Vrms (+22 dBu)

Turn On Delay

2.5 seconds

“TAPCO” is a registered trademark of LOUD Technologies Inc. “Juice” is a trademark of LOUD Technologies Inc.