Trane TCONT600AF11MA, TCONT602AF22MA manual Cool On or Heat On is flashing

Page 21

In case of difficulty

Heating or cooling system does not respond

“Cool On” or “Heat On” is flashing

•Press SYSTEM button to set system to Heat. Make sure the temperature is set higher than the Inside temperature.

•Press SYSTEM button to set system to Cool. Make sure the temperature is set lower than the Inside temperature.

•Check circuit breaker and reset if necessary.

•Make sure power switch at heating & cooling system is on.

•Make sure furnace door is closed securely.

•Wait 5 minutes for the system to respond.

•Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 15).

19

Image 21

Contents TCONT600AF11MA/TCONT602AF22MA Programmable Comfort Control Need Help? Table of contents About your new Comfort Control FeaturesThis Comfort Control is ready to go Function buttons Quick reference to controlsQuick reference to display screen Set the time and day Select the fan setting Select the system setting Save money by setting program schedules Energy Star settings for maximum cost savings To adjust program schedules Program schedule override temporary Program schedule override permanent Auto Changeover heat/cool Built-in compressor protection Adaptive Intelligent Recovery AIR Battery replacement Case of difficulty Temperature settings do not changeCool On or Heat On is flashing Customer assistance Accessories/replacement partsLimited 5-year warranty Low Voltage Room Comfort Controls Limited 5-year warranty GW-646-3704 Troup Highway Tyler, TX