Datexx DF0063
TIME setting -
Press the TIME KNOB & turn
Place the SLIDE SWITCH to middle position, the clock light and torch are ON instantly by lifting up the unit.
Put down unit on desk (or any flat surface) to switch OFF.
You may choose to turn on the TORCH only when lifting up the unit, then place the SLIDE SWITCH to lower position
The clock light and torch are OFF permanently when SLIDE SWITCH is in the upper position.
Switch Position | Clock Light | Torch |
Upper (A) | OFF | OFF |
Middle (B) | ON | ON |
Lower (C) | OFF | ON |
CLOCK TORCH
BATTERY replacement - Open the BATTERY COVER and insert / replace 1 piece AA size battery for the clock (inner most of battery compartment) + 2 pieces AA size battery for the torch.
OBSERVE the correct polarities as indicated.
Light BULB replacement - In case torch bulb is bumt, open the base cover by releasing the two screws and
replace a new 2.4V 0.5A prefocus bulb.
TELEDEX Limited U.S.A. Warranty
TELEDEX INC. warrants these products to the original purchaser to be free from defective material and workmanship. The product will be repaired or replaced at our option, for up to one year when returned with proof of purchase to the address below. Include a check or money order for $3.00 to cover postage.
TELEDEX INC. 1 Atlas st. Kenilworth, NJ 07033
Warranty valid only in the U.S.A. | Printed in China 6/02 |
| www.datexx.com |