Timex 75322A1 manual Basic Setup Setting the Clock Manually, See Manual Setting Instructions

BASIC SETUP

SETTING THE CLOCK MANUALLY

1)Battery Installation – remove the battery compartment cover on the back of the unit and install 2 FRESH “AA” batteries as shown here.

Manual Button

Functions

Up/Down

Arrows

TIME ZONE

SET TIME

ZONE

SET

“Set” to confirm manual settings

Back of Clock

2)Initial Setup – once the batteries are installed, the clock will power up. The display will appear as follows:

Time Zone will default to PST

(Pacific Standard Time)

Room Temp indicator	Signal Indicator
	will be flashing
will be flashing

The clock will begin searching for the Atomic signal

If the signal is AVAILABLE– the clock will receive the local time in 3-5 minutes. The full strength signal indicator bars will appear on the display.

If the signal is NOT readily available – you can manually set the clock and calendar

(SEE MANUAL SETTING INSTRUCTIONS)

After the clock acquires the Atomic clock radio signal (this may take 24-48 hours) the time, date and daylight saving time changes will update automatically, giving you maintenance-free operation and perfect time precision.

3)Choose Your Time Zone – You must set your time zone so the clock will display accurate time once the atomic signal is received:

a.Select your time zone by repeatedly pressing the () ARROW until you see your time zone displayed on the LCD screen.

HAST	AKST	PST	MST	CST	EST	AST
Hawaii Aleutian	Alaska Standard	Pacific Standard	Mountain Standard	Central Standard	Eastern Standard	Atlantic Standard
Standard Time	Time	Time	Time	Time	Time	Time

In the event you wish to manually change the clock settings, please use the instructions on the following page.

-2-

1) SETTING THE CLOCK & CALENDAR

a)Press the “SET” button for several seconds until the LCD screen is flashing.

b)Press the UP () ARROW button to select 12 Hr. (standard) or 24 HR. (Military) time format. Press “SET” to confirm.

c) The HOUR will flash		Press the UP () ARROW repeatedly,	Press “SET”
		until the correct hour (AM or PM) is	to confirm.
		displayed.
d) The MINUTE will flash		Press the UP () ARROW repeatedly,	Press “SET”
		until the correct minute is displayed.	to confirm.
e) The YEAR will flash		Press the UP () ARROW repeatedly,	Press “SET”
		until the correct year is displayed.	to confirm.
f) The MONTH will flash		Press the UP () ARROW repeatedly,	Press “SET”
		until the correct month is displayed.	to confirm.
g) The DATE will flash		Press the UP () ARROW repeatedly,	Press “SET”
		until the correct date is displayed.	to confirm.
h) The ATOMIC CLOCK		Set the Atomic Clock ON or OFF by	Press “SET”
	CONTROL will flash	pressing the UP () ARROW button.	to confirm.
i)	The DST will flash	Set DST (Daylight Saving Time)	Press “SET”
		ON or OFF by pressing the UP ()	to confirm.
		ARROW button.
j)	The F˚/C˚ will flash	Select F˚/C˚ (Fahrenheit or Celcius) by	Press “SET”
		pressing the UP () ARROW button.	to confirm.

-3-