Tote Vision LCD-1901HD owner manual Safety Precautions

Page 3

SAFETY PRECAUTIONS (Continued)

may cause damage, which often requires extensive adjustment work by a qualified technician.

e. When the product has been dropped or damaged.

f.When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing.

In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts.

Use of unauthorized parts can result in fire, electric shock and/or other danger.

Upon completion of service or repair work, request the service technician to perform safety checks to ensure the product is in proper operating condition.

When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

Unplug the power cord from the AC outlet if you do not use the product for an extended period of time.

Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool or in a wet basement.

Keep the product away from direct rays of the Sun-light.

Do not place the product on an unstable cart, stand, tripod or table.

Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instruction.

Use only the mounting hardware recommended by the manufacturer.

When relocating the product placed on a cart, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart.

The vents and other openings in the cabinet are designed for ventilation.

Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, less proper ventilation is provided or the manufacturer's instructions are followed.

The LCD panel used in this product is made of glass.

Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel broken.

Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

The LCD Panel is a very high technology product with 1,296,000 thin film

transistors, giving you fine picture details. Occasionally, a few non-active

 

pixels may appear on the screen as a fixed point of blue, green or red.

 

Please note that this does not affect the performance of your product.

3

 

Image 3
Contents LCD-1901HD 1901HDR/HDL Safety Precautions Safety Precautions LCD-1901HDR LCD-1901HD/HDR/HDL Supplied AccessoriesPreparation Batteries for Remote ControlPreparation Main board connectorsLocation of User Controls Basic Setup Basic OSD UsageSelect item Function PC SetupSelected item ColorDisplay Mode Select 43 or Under Scan Video SetupBackground OSD SetupLanguage OtherLCD-1901HD/HDR/HDL SpecificationsApplicable PC Mode ONE Year Limited Warranty Warranty