Preparation, Batteries for Remote Control

PREPARATION

Remote Control

■Use the remote control by pointing it towards the remote sensor window. Objects between the remote control and sensor window may prevent proper operation.

!Cautions regarding use of remote control

■Do not drop the remote control . In addition, do not expose the remote control to liquids, and do not place in an area with high humidity.

■Do not install or place the remote control under direct sunlight.

The heat may deform the unit.

■The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such case, change the angle of the lighting or HD LCD monitor set, or operate the remote control closer to the remote sensor window.

Batteries for Remote Control

If the remote control fails to operate the HD LCD Monitor functions, replace the batteries in the remote control.

1Open the battery cover.

2Insert batteries (two Size-AAA batteries, Supplied with product).

■Place batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.

3Close the battery cover

!Cautions regarding batteries

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

•Place batteries with their terminals corresponding to the (+) and (-) indications.

•Different types of batteries have different characteristics. Do not mix batteries of different types.

•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals.

•Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

•The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

•If the remote control is not used for an extended period of time remove batteries from the remote control