SVAT ELECTRONICS now you can see
4.BASIC OPERATION
1.Manual Switching Video Inputs: Press the AV button on the remote to switch between video inputs.
2.Press the AUTO button on the monitor to activate auto mode, which will automatically cycle between both inputs. Pressing it once will set the cycle interval to 4 seconds. Pressing
it again will set the cycle interval to 6 seconds. Pressing it a third time will set the cycle interval to 8 seconds. Pressing it a fourth time will turn off auto mode.
5.ADJUSTING SETTINGS
Press the menu button to display the following options:
PICTURE, OPTION, CLOCK, SYSTEM
5.1PICTURE
1.Press the menu button once to display the PICTURE menu.
2.In this menu you can adjust Contrast, Brightness, Color, and Sharpness
3.Use the channel up and down buttons to select the desired setting, and use the volume buttons to increase or decrease the values.
4.Press the MENU key to exit the PICTURE menu.
5.2OPTION
1.Press the menu button twice to display the OPTION menu.
2.In this menu you can adjust Language, Calendar, and Auto Change Source.
3.To change the language, select it and use the volume keys to scroll through the available languages.
4.To view the calendar, select it and press the volume up button. To scroll through the months, use the volume up and down buttons. To scroll between years, use the channel up and down buttons. Press menu to exit calendar mode.
5.The auto change source option provides the same functionality as pressing the AUTO button. Select it, and use the volume buttons to change the interval time.
CLEARVU8 | 6 |