Ruckus Wireless MF2501 manual Shows the Advanced Wireless Configuration parameters

Page 29

Configuring the MF2501 Adapter

Table 10 shows the Advanced Wireless Configuration parameters.

 

Table 10—Advanced Wireless Configuration Parameters

 

 

Field

Description

 

 

 

 

Wireless Mode

Sets the wireless mode for the MF2501 Adapter. The wireless mode

 

determines the wireless speed of devices that are allowed to associate to

 

the MF2501 Adapter. Options are:

 

• 802.11g&b: stations running at either 802.11g (2.4GHz, 54Mbps)

 

or 802.11b (2.4GHz 11Mbps) can associate to the MF2501

 

Adapter. This is the default setting.

 

• 2.4GHz 54Mbps (802.11g only)

 

• 2.4GHz Auto 108Mbps (802.11g Turbo)

 

• 2.4GHz Only 108Mbps (802.11g Turbo)

 

 

!

 

 

CAUTION:—Using Turbo and/or super G mode is NOT supported

 

 

when running video streams. These modes are intended for

 

 

diagnostic and for networks where only non-video traffic is

 

 

transmitted.

 

 

Super G

This check box is used to enable the Super G mode, which engages

 

advanced mechanisms when extra bandwidth is available and or required.

 

By default, this option is not checked.

 

 

Data Rate

Select the desired data rate from the drop-down menu. The default is

 

Best, which means the system will adjust the data rate automatically.

 

 

Transmit Power

Select the desired Adapter transmit power from the drop-down menu. In

 

cases where you might want to limit your signal coverage range, such as

 

in a small apartment or room, you can select a lower transmit power.

 

The options are:

 

Full

 

Half (-3 dB)

 

Quarter (-6 dB)

 

Eighth (-9 dB)

 

Minimum

The default is Full.

8000003, December 2005 MediaFlex 2501 Multimedia Wireless Adapter User’s Guide

29

Image 29
Contents Part number December MediaFlex 2501 Multimedia Wireless Adapter User’s GuideInformation to the user EN 55 022 Declaration of Conformance Contents Viewing LAN Interface Statistics Appendix a Technical SpecificationsWhat You’ll Find in this Guide Who Should Use this GuideTypographic conventions Following topics are coveredSystem Requirements Support and Warranty InformationIntroduction MediaFlex Key FeaturesBeamFlex Media QoS Ensures Highest Video QualitySimple Configuration and Installation Key Features Installation and Setup Front View MediaFlex 2501 Multimedia Wireless AdapterPacking List LED Status Lights LED Indicators and Meanings LabelActivity Description Marginally Acceptable Air Quality a flashing GreenLabel Description Rear ViewConnecting to the MF2501 Adapter Placement GuidelinesUsing the Air Quality Indicator to fine-tune the placement Manually Configuring an IP Address on Your PCInternet Protocol TCP/IPProperties Window Connecting a PC to the MF2501 AdapterDefault Wireless Settings Wireless Feature Accessing the Web InterfaceAccessing the Web Interface Using the Ruckus Wireless Web Interface Key Wireless Settings WorksheetStore this information in a safe place MF2501 Adapter Settings WorksheetAir Quality Indicator Ruckus Wireless Web Interface MenusWireless Web Interface Menu Buttons Common ButtonsAir Quality Indicator System Configuration Configuring the MF2501 AdapterField Description Customizing the System ConfigurationSystem Configuration Wireless Interface Configuration Configuring the Wireless InterfaceFor United States only Wireless Interface ConfigurationFill in the parameters as described in Table Advanced Wireless Configuration Advanced Wireless ConfigurationAdvanced Wireless Configuration Parameters Shows the Advanced Wireless Configuration parametersAdvanced Wireless Configuration Parameters Field Description Configuring WEP SecurityExplains the WEP Configuration parameters Using a Passphrase to Generate Keys WEP ConfigurationAuthentication WPA Configuration Configuring WPA PSKExplains the WPA Configuration parameters System Information Viewing System InformationSystem Information Parameters Viewing Wireless InformationExplains the System Information Parameters Adapter associated to Viewing LAN Interface Statistics Viewing StatisticsExplains the LAN Statistics window parameters LAN Statistics Window ParametersLAN Statistics Window Parameters Field Description Viewing Wireless StatisticsWireless Statistics Wireless StatisticsMsdu Remote AP Statistics Viewing Remote AP StatisticsRemote AP Statistics Describes the Remote AP Statistics parametersPerforming a Web Download Updating the FirmwareUpdating the Firmware Updating the Firmware Tftp or FTP DownloadDescribes the Updating the Firmware parameters Click the reboot option you want. The window of appears Rebooting the SystemHow to tell when the Wireless Adapter is ready? Reboot in ProcessDescribes the support menu parameters Taking a System Support SnapshotTaking a System Support Snapshot Taking a System Support Snapshot Performance and Supported Configurations Physical CharacteristicsExternal power adapter MF2501 AdapterTraffic Management and QoS Management

MF2501 specifications

Ruckus Wireless MF2501 is a cutting-edge mobile broadband deployment device engineered to meet the evolving demands of modern connectivity. It stands out in the industry due to its versatile features and advanced technologies, designed to provide robust performance in various environments.

One of the key features of the MF2501 is its multi-band capability, supporting both 4G LTE and 3G networks. This ensures that users can maintain a strong and reliable connection across different network conditions, offering enhanced flexibility for applications requiring seamless Internet access on the move. With built-in carrier aggregation, the MF2501 optimizes bandwidth usage, resulting in faster data speeds and improved network efficiency.

The device also boasts features that enhance its cellular performance, such as smart antenna technology. This technology dynamically adjusts signal patterns to mitigate interference and boost throughput. It can effectively penetrate buildings, making it an ideal choice for urban areas and densely populated environments.

In addition to its robust connectivity options, the MF2501 is equipped with advanced security measures. It supports Virtual Private Networks (VPNs) and features encryption protocols that safeguard sensitive data during transmission. This level of security is essential for businesses and individuals who prioritize privacy and data protection.

User-friendliness is another highlight of the MF2501. The device includes an intuitive web-based management interface, allowing administrators to easily configure settings, monitor performance, and troubleshoot issues. This accessibility reduces the complexity often associated with network management, enabling quicker responses to connectivity challenges.

Furthermore, the MF2501 is designed with scalability in mind. It can be integrated into larger network architectures, making it suitable for both small businesses and expansive corporate environments. It is also compatible with various cloud management platforms, allowing for central monitoring and management across multiple devices and locations.

In summary, the Ruckus Wireless MF2501 is a powerful tool for navigating the challenges of modern connectivity. Its multi-band support, smart antenna technology, rigorous security features, and user-friendly management options make it an excellent choice for anyone in need of reliable mobile broadband solutions. Whether for personal use or organizational needs, the MF2501 offers a sophisticated approach to maintaining an always-on connection.