SteelEye 4.5.0 manual Troubleshooting, Common Error Messages, Hierarchy Creation

Page 18

Troubleshooting

Troubleshooting

Error Messages

This section provides a list of messages that you may encounter with the use of the LifeKeeper LVM Recovery Kit. Where appropriate, it provides an additional explanation of the cause of an error and necessary action to resolve the error condition.

Because the LVM Recovery Kit relies on other LifeKeeper components to drive the creation and extension of hierarchies, messages from these other components are also possible. In these cases, please refer to the documentation for the appropriate LifeKeeper component.

Messages in this section fall under these topics:

Common Error Messages

Hierarchy Creation

Hierarchy Extension

Hierarchy Restore

Resource Monitoring

LVM Recovery Kit Error Messages

Common Error Messages

Error Number

Error Message

 

 

000002

Usage error

 

 

000010

Error getting resource information

 

 

000011

Both Tag and ID name not specified

 

 

000019

Resource not found on local server

 

 

000022

END failed hierarchy <tag name> in service on server

 

<server name>

 

 

000026

END failed ACTION for <tag name> on server <server

 

name> due to <signal> signal

 

 

Hierarchy Creation

Error Number

Error Message

 

 

000012

Switchback type not specified

 

 

000013

Usage error

 

 

000014

Resource with either matching tag <tag name> or ID exists

 

 

000015

ins_create failed on server <server name>

 

 

000018

Error creating resource <tag name> on server <server

 

name>

000021

Removing resource instance < tag name> from server

 

<server name> due to an error during creation

 

 

16

LVM Recovery Kit Administration Guide

Image 18
Contents Logical Volume Manager LVM Recovery Kit Administration Guide LifeKeeper for LinuxRevision A 06/2004 Linux is a registered trademark of Linus Torvalds ip@steeleye.comTable of Contents LVM Recovery Kit Administration Guide Document Contents IntroductionLVM Recovery Kit Administration Guide LifeKeeper for Linux Planning and Installation Guide Documentation and ReferencesLifeKeeper for Linux Release Notes Requirements Hardware RequirementsSoftware Requirements LifeKeeper for Linux LVM Recovery Kit OverviewLVM Operation Volume Group Activation LVM Recovery Kit Notes and RestrictionsLinux Boot Script Modifications Support for Raw I/O and Entire DisksLVM Version Support LifeKeeper LVM Hierarchy Creation and Administration Hierarchy Creation Procedure2. On the system which is to be the primary server for your application, create and activate the desired volume groups and logical volumes using the tools provided by the LVM package, and described in the LVM HowTo document referenced in the Documentation and References section above Using LVM with LifeKeeper Data Replication Figure 3 Hierarchy with LVM above LKDRVolume Group Reconfiguration Figure 4 LVM volume group Resource Properties dialogFigure 5 LVM volume group reconfiguration for added device Figure 6 LVM volume group reconfiguration for added device Figure 7 LVM volume group reconfiguration for deleted device Figure 8 LVM volume group reconfiguration for deleted deviceCommon Error Messages TroubleshootingError Messages Hierarchy CreationHierarchy Extension Hierarchy Restore LVM Recovery Kit Error MessagesResource Monitoring