SOYO SOYOTM SY-KT880DRAGON2 manual You can use your IDE3/IDE4 as, To boot from the IDE 3/IDE4

ALI M5281 IDE3/IDE4 Driver Installation SY-KT880 DRAGON 2

Chapter 5

ALI M5281 IDE3/IDE4 DRIVER

INSTALLATION

You can use your IDE3/IDE4 as

1.Normal IDE function.

2.RAID function. (RAID0, 1, 0+1)

To use IDE3/IDE4 as normal IDE, please do the following steps

1. Go to the CMOS setup SOYO COMBO Feature and set the “Onboard SATA/PATA 3,4” to “Enable”.

2.Install the ALi M5281 driver. See driver installation instruction below.

To use IDE3/IDE4 as RAID controller, please do the following steps

1.Connect 2 hard disk on IDE3/IDE4.

2.	Go to the CMOS setup	SOYO COMBO Feature and set the
	“Onboard SATA/PATA 3,4” to “Enable”.
3.	Go to the CMOS setup	BOOT CONFIGURATION SETUP
	BOOT DEVICE PRIORITY

4.Set the “First Boot Device” to “SCSI Card”.

5.Press “Ctrl+A” when the Ali M5281 BIOS summary screen appears.

6.Create a disk array, check appendix A for create instructions.

7.Install the ALi M5281 driver. See driver installation instruction below.

To boot from the IDE 3/IDE4
1.	Go to the CMOS setup	SOYO COMBO Feature	and set the
	“Onboard SATA/PATA 3,4” to “Enable”.
2.	Go to the CMOS setup	SOYO COMBO Feature	and set the

82