Cable Choice, Terminal Panel

Cable Choice

Always use the best quality of cable available within your budget. High quality audio signals passing from the amplifier to the loudspeaker are unusual in their demands on the cable. Wide dynamic range and frequency bandwidth information has to coexist with the ability to transmit peak currents of at least 10 amps, without incurring any loss or signal impairment. This explains why the sound quality of the information reproduced by the loudspeakers is so dependant on the physical properties of the cables connecting them to the amplifier.

Terminal Panel

In order to take advantage of the driver earthing feature within Glenair 10 and to optimise performance further, use a shielded or screened loudspeaker cable. The screening termination should be connected to the earth or 'ground' (green) terminal on the loudspeaker and to the ground or earth connection on the amplifier.

Alternatively if you are not using a screened loudspeaker cable but wish to utilise the earthing facility, run a single cable between the earth or 'ground' (green) terminal on the loudspeaker to the earth (ground) connection on the amplifier.

HIGH FREQUENCY	HIGH FREQUENCY
NEGATIVE(-) TERMINAL	POSITIVE(+) TERMINAL

LOW FREQUENCY	LOW FREQUENCY
NEGATIVE(-) TERMINAL	POSITIVE(+) TERMINAL

'EARTH' OR 'GROUND' TERMINAL

Connecting your Loudspeakers

To avoid potential damage to your loudspeaker, ensure that the amplifier is switched OFF prior to connecting or disconnecting any cables. Before switching on double check that all connections are secure and that polarity is correct.

CONNECTION IN SINGLE WIRE MODE

RIGHT

SPEAKER

+ -	+ -
L	R

POWER AMPLIFIER

	TO 'GROUND' OR
	'EARTH'
LINKS IN PLACE	CONNECTION
LINKS IN PLACE	ON AMPLIFIER (OPTIONAL)

•Without removing the link plates on the terminal panel, start with the red (positive) lead. Fit this into the red (positive) high frequency (HF) terminal on the loudspeaker. To do this, loosen the terminal nut sufficiently to allow insertion of the cable and then re-tighten the terminal nut finger-tight.

•The cable at the other end of the lead should be connected to the red (positive) terminal on the amplifier.

•Repeat this operation for the black (negative) HF terminal, and connect to the black (negative) terminal on the amplifier.

•Repeat the whole operation for the other loudspeaker.

Choosing the HF terminals for single wire mode has been found to give the best sound quality.

Select a signal source, such as a CD player; switch on the amplifier and slowly turn up the volume control to check that both loudspeakers are reproducing bass and treble information.

10 specifications

Tannoy, a name synonymous with high-quality audio reproduction, has captured the hearts of audiophiles and professionals alike for generations. Among its revered line of products is the Tannoy 10, a speaker that encapsulates the company's commitment to innovation, craftsmanship, and performance.

The Tannoy 10 features a 10-inch dual concentric driver, a hallmark of Tannoy's design philosophy. This technology combines the woofer and tweeter into a single point source, ensuring that sound waves emanate from the same location. This alignment minimizes phase cancellation and ensures a coherent, immersive soundstage. The result is a smooth frequency response across a wide range, making the Tannoy 10 ideal for both music playback and critical listening environments.

In terms of build quality, Tannoy leaves no stone unturned. The cabinet is constructed from high-grade materials, designed to minimize resonance and unwanted coloration of sound. The internal bracing adds rigidity to the structure, helping to maintain clarity and precision, even at higher volume levels. The Tannoy 10’s aesthetic appeal is enhanced by a classic wood veneer finish, which not only looks stunning but also complements a variety of home decor styles.

One of the standout characteristics of the Tannoy 10 is its versatility. Whether used in a home studio for music production, as part of a high-fidelity home audio system, or for public address applications, this speaker can handle it all. Its robust power handling capacity and sensitivity allow it to perform well in both small and large environments, making it a go-to choice for many professionals.

The speaker is also equipped with advanced technologies such as the Tannoy Waveguide, which enhances high-frequency dispersion, allowing for a wider sweet spot. This means that listeners can enjoy consistent audio quality from various positions within the room. Coupled with a refined crossover design, the Tannoy 10 effectively manages the transition between frequencies, ensuring a balanced output.

In conclusion, the Tannoy 10 is a testament to Tannoy's legacy of sound excellence. With its dual concentric driver technology, exceptional build quality, versatile application, and thoughtful engineering, it stands out as one of the premier choices for audiophiles and professionals seeking unparalleled audio performance. Whether for casual listening or studio use, the Tannoy 10 continues to impress with its ability to deliver rich, detailed sound that brings music to life.