SOYO SY-KT600 DRAGON Plus Motherboard USB203 / USB204, 1394 FW1, 1394 FW2, Chassis Fan CHAFAN2

SY-KT600 DRAGON Plus Quick Start Guide

USB20_3 / USB20_4

Pin1	Pin2			Pin3		Pin4	Pin6	Pin7	Pin8	Pin9	Pin10
VCC	Data(-)		Data(+)			GND	VCC	Data(-)	Data(+)	GND	GND
						1394: FW1
Pin1	Pin2	Pin3			Pin4	Pin5	Pin6	Pin7	Pin8	Pin9	Pin10
A0PC	GND	B0PC			NC	PWR0	A0MC	CGND	B0MC	PWR0	CGND
						1394: FW2
Pin1	Pin2	Pin3			Pin4	Pin5	Pin6	Pin7	Pin8	Pin9	Pin10
A1PC	GND	B1PC			NC	PWR1	A1MC	CGND	B1MC	PWR1	CGND

Hardware Installation

CPU Cooling Fan: CPUFAN1

Pin1		Pin2	Pin3
GND		12V	SENSOR
	Chassis Fan: CHAFAN1
Pin1		Pin2	Pin3
GND		12V	SENSOR

CPU Cooling Fan: CPUFAN2

Pin1		Pin2	Pin3
GND		12V	NC
	Chassis Fan: CHAFAN2
Pin1		Pin2	Pin3
GND		12V	NC

	CD -IN: CDIN1 / AUXIN1					Pin1	Pin2	Pin3	Pin4
Connect the CD Line-in cord from the CR-ROM					CDIN1	L	G	G	R
device to the matching connector CDIN					AUXIN1	L	G	G	R
Power LED		Speaker				Power LED
				Pin1		Pin2		Pin3
				VCC		NC		GND
						Speaker
Reset				Pin1	Pin2		Pin3	Pin4
	PWRBT	HDD LED		VCC	NC		NC	Speaker out
HDD LED				PWRBT			RESET
Pin1		Pin2	Pin1		Pin2		Pin1	Pin2
LED Anode	LED Cathode		Power On/Off		GND	Power Good		GND

ATX Power On/Off: PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, press this switch and hold down for longer than 4 seconds.

ATX Power Supply: ATX PW

Attach the ATX Power cable to this connector. (This motherboard requires an ATX power supply, an AT power supply can NOT be used.)

Note: We recommend using an AMD approved power supply or at least 350W.

When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to provide at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.

17