SOYO SY-P4I845PEISA, SY-P4I845GEISA Boot-up Issues, System power-up, no video, beeping heard

Page 24

SY-P4I845PEISA/GEISA Quick Start Guide

Quick Trouble shoot tips

Boot-up Issues

The system does not power-up, no beeping sound heard and the CPU fan does not turn on.

1.Check if the power cord is plug to the power source.

2.Check if the power is connected to the M/B.

3.Check if the cable of the case power button is connected to the M/B power button connector (see connectors and plug-ins in the manual for more info).

4.Make sure the power supply is not defective. Change the power supply. The minimum should be 350 watts.

5.Remove the M/B from the case and test the system. The M/B might be shorted to the case.

6.Make sure your power supply is ATX 12V compliant.

The system power-up, no video, no beeping sound heard, but the CPU fan is turning.

1.Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how to clear the CMOS).

2.Check all the jumper settings on the M/B. (if the M/B have any).

3.Check if the CPU is ok by using another CPU (check the Quick start guide for CPU supported on this M/B).

4.Check if the power supply is ok. The minimum should be 350 watts.

5.Make sure the CPU fan is connected to CPUFAN1 connector.

6.Remove the M/B from the case and test the system. The M/B might be shorted to the case.

7.Change the VGA card. If you have used a 3.3V AGP card, the M/B might be damaged.

The system power-up, no video, beeping heard.

1.Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how to clear the CMOS).

2.Check all the jumper settings on the M/B. (if the M/B has any).

3.Check the memory module and the VGA card if they are inserted properly in the M/B.

4.If yes, change the memory module, it might be defective. Make sure the memory specification is supported by the M/B. (for more info on this, check our FAQ website).

5.Change the VGA card. Make sure the AGP card is 1.5v

24

Image 24
Contents Quick Start Guide Soyo SY-P4I845PEISA/P4I845GEISA Motherboard P4I845PEISA/GEISA Serial Version 1.1 Edition AugustUnpacking SY-P4I845PEISA/GEISA Quick Start GuideSY-P4I845PEISA Motherboard Layout COM aSY-P4I845GEISA Motherboard Layout Key Features PC99, AcpiInstallation Install the Motherboard Install the CPUMemory Configuration Table Configure MemoryMIC & LED Connector J30 Power LED Key LockPower On/Off Pwrbt CPU Cooling Fan CPUFAN1ATX 12V Power Supply ATX PW Install expansion cards Cmos Clear JP5Audio Speakers connections Onboard LAN LED DefinitionSelect Standard Cmos Setup Select Load Optimized DefaultsSelect Save & Exit Setup Insert the Soyo CD into the CD-ROM drive Soyo CD Start Up Program MenuInstall Drivers and Utilities Driver Installation Menu Short description of all available drivers followsIntel Application Accelerator for Win 98/98SE/ME/NT/2000/XP Intel USB20 Driver for Win 98/MECheck the Latest Releases ForP4I845GEISA only Soyo CD Cmediadriver IntelIAA IntelInfDriver USB2.0 Driver Installation Boot-up Issues System power-up, no video, beeping heardStability Issue My system intermittently locks up, very unstableBios Issue Where can I find the Bios revision of my mainboard?After flashing the BIOS, my system will not boot-up VGA Issue Audio IssueHow can I disable the on-board Audio? Cannot set my VGA to go higher than 16 color 640xHard disk/FDD/ CD-ROM issue LAN IssuesHow to contact us TaiwanEditionAugust2003 Version
Related manuals
Manual 87 pages 28.31 Kb

SY-P4I845PEISA, Motherboard, SY-P4I845GEISA specifications

The SOYO SY-P4I845PEISA is a highly regarded motherboard that has made a mark in the realm of computer enthusiasts and builders. Designed to support Intel processors, this motherboard harnesses the power of the Intel 845PE chipset, which is optimized for high performance and reliability.

One of the standout features of the SY-P4I845PEISA is its compatibility with Intel’s Pentium 4 processors, enabling users to push their systems to impressive speeds. The motherboard supports a front-side bus speed of up to 800 MHz, allowing for seamless data transfer and efficient multitasking capabilities. Coupled with its advanced memory architecture, which supports DDR SDRAM up to 2GB, it ensures that users can run demanding applications and games without experiencing latency issues.

In terms of connectivity, the SY-P4I845PEISA is equipped with an impressive array of slots and ports. It features five PCI slots, providing ample room for expansion cards such as graphics cards, sound cards, and network cards. Additionally, the motherboard includes an AGP 8X slot, which is crucial for gamers looking to achieve high frame rates and stunning graphics in their gaming experience. The inclusion of both USB 2.0 and onboard LAN ensures that users can connect to various peripherals and networks effortlessly.

Storage capabilities are another strong suit for the SY-P4I845PEISA. The motherboard is designed with IDE RAID support, which allows users to configure multiple hard drives in RAID arrays for enhanced performance and data redundancy. Furthermore, it provides Serial ATA (SATA) support, reflecting the technological advancements of the time and offering faster data transfer rates over traditional IDE connections.

The SY-P4I845PEISA also emphasizes system stability and durability. It comes equipped with several onboard diagnostic features, such as power management and fan monitoring, enabling users to keep their systems running efficiently and maintaining optimum thermal performance. The dual BIOS feature serves as an additional safety net, allowing users to recover from potential BIOS failures.

Overall, the SOYO SY-P4I845PEISA is a well-rounded motherboard that combines features, technology, and reliability. Whether for gamers, professionals, or everyday users, it presents an excellent choice for building a high-performance desktop system that can accommodate modern computing needs. Its balance of expansion options, support for powerful processors, and solid build quality makes it a noteworthy contender in the motherboard market.