SOYO SY-7IWB Quick Bios Setup, Select Standard Cmos Features, Select Load Optimized Defaults

Page 13

SY-7IWBQuick Start Guide

3 Quick BIOS Setup

This Motherboard does not require any hardware jumpers to set the CPU operating frequency. Instead, CPU settings are software configurable with the BIOS [Soyo Combo Feature]. The [Soyo Combo Feature] menu combines the main parameters that you need to configure. They are all in one menu to enable a quick setup in BIOS.

After completion of hardware installation, turn the power switch on, then press the <DEL> key while the system diagnostic is checking to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then follow these steps to configure the CPU settings.

Step 1. Select [Standard CMOS Features]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.

Step 2. Select [Load Optimized Defaults]

Select the “Load Optimized Defaults”menu and type “Y”at the prompt to load the BIOS optimal setup.

Step 3. Select [Soyo Combo Feature]

Move the cursor to the [CPU Frequency] field to set the CPU frequency.

The following table shows all available [CPU Frequency] settings on your SY-7IWB Motherboard . If you set this field to [Manual], then you will be required to fill in the next two consecutive fields: (1) the CPU Host/PCI Clock, and (2) the CPU Ratio.

Quick BIOS Setup

CPU Frequency

300MHz (66 x 4.5)

333MHz (66 x 5.0)

366MHz (66 x 5.5)

400MHz (66 x 6.0)

433MHz (66 x 6.5)

466MHz (66 x 7.0)

500MHz (66 x 7.5)

Select the working frequency of your Celeron TM processor among these preset values.

Note: Mark the checkbox that corresponds to the working frequency of your CeleronTM processor if the CMOS configuration is lost.

Note: if you use Bus Frequencies of 75 MHz, make sure that your PCI cards are compatible with the higher PCI clock.

Step 4. Select [SAVE & EXIT SETUP]

Press <Enter> to save the new configuration to the CMOS memory, and continue with the boot sequence.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Quick Start Guide 7IWB Serial Version 1.0 Edition July SY-7IWB MotherboardUnpacking IntroductionIntel SY-7IWB Motherboard LayoutKey Features Installation CPU Installation Install the MotherboardATX Power On/Off Pwrbt Power LED KeylockATX Power Supply ATX PW Connections to the MotherboardConfigure Memory Set J6 &JP2 to configure CPU FSB FrequencyAuto Mode NumberFWH Boot Block Locked Set for JP9 FWH Boot Block Write-ProtectSet the CPU Frequency CPU Core Voltage Adjust JP15 Enable/Disable Power-On by Keyboard JP1PC speaker redirection JP10 Clear Cmos Data Retain Cmos Data Cmos Clear JP5Select Standard Cmos Features Quick Bios SetupSelect Load Optimized Defaults Select Soyo Combo FeatureInsert the Soyo CD into the CD-ROM drive Soyo CDRead Soyo 7IWB Manual Soyo CD Start Up Program MenuManual Selection Menu Install DriversIntel Whitney security utility for Win 9x/NT Intel Whitney .inf utility for Win7IWB Winbond hardware Doctor for Win 95/98 Enter the Soyo CD Check the Latest ReleasesUninstalling/Re-Installing Crystal Audio Drivers Installing Crystal Audio Drivers under windowsKnown Limitations Uninstalling or Updating Crystal Audio Drivers Installing Crystal Audio Drivers for Windows NTSpecial Design Considerations Soyo Taiwan How to contact usSoyo Europe BV Soyo Hong Kong Soyo Deutschland GmbHSoyo China Gin Mei Jei Soyo JapanEdition July Version

SY-7IWB specifications

The SOYO SY-7IWB is a notable motherboard that was popular in the late 1990s, aimed primarily at enthusiasts and users looking for a reliable yet feature-rich platform for their systems. This motherboard utilizes the well-regarded VIA Apollo chipset, which was known for its stability and performance at the time.

One of the key features of the SY-7IWB is its support for the Socket 370, which accommodates Intel's Coppermine processors. This allowed users to leverage the performance enhancements of the Pentium III and Celeron CPUs, making it a versatile choice for a variety of computing tasks. The motherboard supports both FSB (Front Side Bus) speeds of 100MHz and 133MHz, giving users the flexibility to optimize performance based on their chosen processor.

In terms of memory, the SOYO SY-7IWB features three DIMM slots, allowing for a maximum of 1.5GB of SDRAM. This was particularly appealing for users engaged in multitasking or resource-intensive applications, as it provided ample memory expansion capabilities. The board also effectively supports various memory configurations and speeds, further enhancing its adaptability.

Storage options on the SY-7IWB include an ATA66 IDE controller, supporting up to four IDE devices, which facilitated the connection of hard drives and optical drives, meeting the needs of users for ample storage space. Additionally, the motherboard includes a built-in ISA slot, offering compatibility with legacy expansion cards, which was a significant advantage for users who still relied on older peripherals.

Another noteworthy aspect of the SY-7IWB is its integrated audio capabilities, allowing users to enjoy sound directly from the motherboard without the need for a separate sound card. This provided convenience for general users and casual gamers alike.

Lastly, SOYO was recognized for its user-friendly BIOS setup, allowing both novice and experienced users to easily navigate and configure system settings. The SY-7IWB motherboard also features solid build quality and reliable thermal management, ensuring stable operation during demanding tasks.

While the SOYO SY-7IWB may not be as widely known today, it represented a solid option for users in its time, combining performance, expandability, and user-friendly features within a well-designed motherboard.
Top Page Image Contents