Position Print Hammer
Half Space
Code | + | % ¿ |
| 5 |
Type Correction
Correct
| Return |
| ||
| Reloc |
| ||
Code |
|
| Return | |
|
| |||
+ | ||||
|
| |||
|
|
| Reloc | |
Position Print Hammer
Code | + | Correct |
Retype the Incorrect Character
to Erase the Error
Type Correction
Code | + | Return |
|
| |
|
| Reloc |
Auto Half Space
Use this feature to insert one additional character into a word or delete one or more character(s) from a word.
1.Position print hammer to any character in the incorrect word.
2.Press Code + Half Space (5) to activate Auto Half Space. The word is automatically erased. Print hammer locates on the center of the space.
3.Type the desired word. (Characters appear on the display.) Use Correct to correct errors on the display.
4.Press Return. The new word prints.
5.Press Code + Reloc (Return) to return to your previous typing position.
NOTE: You can use the WordFind feature to quickly locate misspelled words within correction memory.
Off-Line Correction
To correct an error not in the correction memory buffer:
1.Position the print hammer to the incorrect character using
Code + 
, Code + 
, Code + 
, Code + 
, Spacebar, Return, and Back Space. Do not use the platen knob to position the print hammer.
2.Press Code + Correct. One beep is heard, and the display prompts:
Manual Correct.
3.Release both keys. You can cancel the correction by pressing Return.
4.Retype the incorrect character to erase the error.
5.Type the correct character.
6.Press Code + Reloc (Return) to quickly return to your previous typing position.
NOTE: For bold characters, repeat the correction process, if necessary.
Smith Corona Corporation |