Wharfedale opus user manual Setting UP AV Systems, Setting Loudspeaker Sizes, Setting Levels

Page 13

opus

SETTING UP AV SYSTEMS

Setting Loudspeaker Sizes

Many digital AV Processors require you to specify the size of speakers in all channels. These are usually ‘Large or small’. For Opus set the front speakers to ‘large’, set the centre to ‘large’ and the surrounds to small. The subwoofer then will reproduce only the LFE bass signals.

If you are not using a subwoofer: Set the front speakers to set the subwoofer option on the processor to ‘Off’ or ‘No’. The front channels will now receive all the system bass.

(If you are using a subwoofer: When front speakers are set to small the bass for these channels will pass into the subwoofer. If you choose large for the front channels, bass will be reproduced from the front speakers and the sub will just control the LFE channel).

Setting Levels

Once the loudspeaker settings have been finalised, put the AV amplifier into its “test” mode (see instructions supplied with your processor). Adjust the level of each channel in turn until all channels are reproduced at equal loudness.

On some programme material the surround channel may seem lower than the front. Do not readjust this level. You may, however, need to adjust the subwoofer output level. Avoid setting too high a level or you will swamp the sound with bass. This can be tiring to listen to, and may limit the subwoofer’s abili- ty to respond to large bass transients. You should also set a sensible level going into the subwoofer from the AV processor.

1 3

Image 13
Contents Opus Within this Pack ContentsUser Warnings Opus Series Setting Up the Opus Series Safely Unpacking Opus 1, 2 Opus Tri-Centre Check YOU haveUser Pack Connections and Terminals Loudspeaker PreparationPositioning Front Speakers Rightleft Speaker Speaker Connecting Hifi SpeakersHome Theatre Environment Positioning AV SpeakersFront and Effects Channels Opus Tri-Centre LoudspeakerSubwoofer Positioning & Connecting AV SpeakersOpus Centre Loudspeaker Opus Surround LoudspeakerSetting Loudspeaker Sizes Setting UP AV SystemsSetting Levels Phase Delay SettingsLFE Looking After Your Loudspeaker USA Asia Technical Support and InformationUSA About Your Loudspeaker Cabinet ‘THE Opus SERIES’Bass Drivers Drive Units75mm 3 Soft Dome Midrange Crossover and WiringSpecifications Opus TRI-CENTRE 250mm 200mm 170mm Tweeter Specifications Midrange SpecificationsCrossover Specifications 2097x2 0723 0334 2096 0723 03262542x2 0723 0334 17104x2 0719 0334Quality Management

opus specifications

Wharfedale Opus is a distinguished line of loudspeakers that has garnered attention for its exceptional sound quality and craftsmanship. Known for its rich audio heritage, Wharfedale has continuously pushed the boundaries of speaker technology, and the Opus series exemplifies this commitment.

One of the key features of the Opus series is its impressive driver technology. Utilizing a combination of advanced materials, the speakers are designed to deliver a rich and dynamic soundstage. The proprietary woven Kevlar cone drivers provide a balanced frequency response, allowing for clear highs, detailed mids, and robust bass. The woofers in the Opus series are engineered to handle powerful dynamics, ensuring that every musical note is reproduced with precision.

In addition to the drivers, the Opus series incorporates a sophisticated crossover network. This technology ensures that each driver operates within its optimal frequency range, providing seamless integration between the low, mid, and high frequencies. The result is an immersive listening experience that captures the nuances of every track, whether it is a symphony or a modern pop song.

Another standout characteristic of the Wharfedale Opus speakers is their elegant design. The cabinets are constructed from high-quality materials, which not only enhance the aesthetic appeal but also contribute to sound quality by minimizing cabinet resonance. Available in multiple finishes, Opus speakers can complement a wide range of home decors, making them as much a piece of art as they are a tool for listening.

The Opus series also integrates advanced damping technologies to reduce unwanted vibrations, further enhancing sound clarity. By applying innovative engineering techniques, Wharfedale ensures that each speaker delivers a natural and engaging audio experience. Whether placed in a dedicated listening room or a casual living space, Opus speakers are designed to perform.

Additionally, Wharfedale's attention to detail extends to the speaker terminals, allowing for secure connections with high-quality cabling. This facilitates bi-wiring or bi-amping setups, giving audiophiles the flexibility to optimize their sound system according to personal preferences.

In summary, Wharfedale Opus speakers are a testament to the brand’s dedication to high-fidelity audio. With advanced driver technology, sophisticated crossover networks, elegant design, and innovative damping systems, they deliver an exceptional listening experience that appeals to both casual listeners and dedicated audiophiles alike. The Opus series not only highlights Wharfedale’s legacy but also sets a benchmark for performance and beauty in the world of loudspeakers.