SIIG EVTEK-5103 manual Data bits = Flow control = none Parity = none Stop bits =, DS89C420

Providing Power for EVTEK-5103:					1) If the main power input is used, connect the MASCOT 8717 plug
					2) If the auxiliary power input is used, connect a standard 9 V battery
Choosing EVTEK-5103 Operation Modes:
		Switch Position:			Mode	Corresponding Operation Mode:	Terminal
	MSB (*		mid (*	LSB (*	nr.		Response:
	LO		LO	LO	0	Receive a file from PC to Board RAM	“(enter)RCV:“
	LO		LO	HI	1	Transmit a file from Board RAM to PC	“(enter)TMT:“
	LO		HI	LO	2	Copy lowest 32 kB RAM to EEPROM	“(enter)R2E:“
	LO		HI	HI	3	Copy 32 kB EEPROM to lowest RAM	“(enter)E2R:“
	HI		LO	LO	4	Start executing program code from 4000h	“(enter)EXC:“
	HI		LO	HI	5	Stand-alone – does first mode 3, then 4	“(enter)S-A:“
	HI		HI	LO	6	Board’s Embedded Debugger CLI Tool	“(enter)DBG:“
	HI		HI	HI	7	Test mode – blinks Board’s I/O-ports	“(enter)Test“

(* when seen from the front, MSB switch is the rightmost, and LSB is the leftmost

Implementing Serial Connection:

Connect the EVTEK-5103 Board’s serial port 1 and PC’s available serial port with a cross-connected serial cable

Interfacing the EVTEK-5103 from a PC:

It is recommended to use the “EVTEK-5103 Interface” application, that is specifically made for this purpose. The user guide for the application: START MENU Æ PROGRAMS Æ EVTEK-5103 Æ INTERFACE MANUAL

If using a terminal program instead of “EVTEK-5103 Interface” application:

Use Hyperterminal (not under Windows 2000), or Tera Term http://hp.vector.co.jp/authors/VA002416/teraterm.html

Terminal Program Connection parameters:

	Baud rate = 57600 kbps				Data bits = 8	Flow control = none
	Parity = none				Stop bits = 1	COM port = the one you’re using on PC
	Enter key = CR+LF				Local echo = no	Destructive backspace = yes
	Also, set terminal scrollback buffer to				at least 500 lines for convenience of use.
EVTEK-5103 Board’s Programmable Peripheral Datasheets:
		8051	AT89C55WD http://www.atmel.com/dyn/resources/prod_documents/DOC1921.PDF
		CPU:	DS89C420	http://pdfserv.maxim-ic.com/arpdf/DS89C420.pdf
		UART:	TL16C552	http://focus.ti.com/lit/ds/symlink/tl16c552a.pdf
		PIO:	M82C55A	http://www.okisemi.com/datadocs/doc-eng/msm82c55a_2rs.pdf