5.Carefully align the card's bus connector with the selected PCIe slot on the motherboard. Push the board down firmly, but gently, until it is well seated.
6.Replace the slot bracket holding screw to secure the card.
7.Replace the computer cover and reconnect the power cord.
Driver Installation
Follow the steps below to install the driver.
Windows 7 (32-/64-bit) / Vista (32-/64-bit)
1.Make sure the board is installed, then boot up Windows.
2.At the Windows desktop.
For Windows 7:Go directly to step 3.
For Windows Vista: At the Found New Hardware window, click Cancel.
3.Insert the driver CD.
For Windows 7: at the CD AutoPlay box, click Open folder to view files, then double click Setup.
4