SIIG 104-0722A Windows Server 2008 R2, Click Browse my computer for driver software advanced

Page 8

6.Click Browse my computer for driver software (advanced).

7.For 32-bit: Type in D:\32-bit, then click

Next. (Change D: to match your CD/DVD- ROM drive letter)

For 64-bit: Type in D:\64-bit, then click

Next. (Change D: to match your CD/DVD- ROM drive letter)

8.Click Close.

9.Repeat steps 4-8to complete the installation.

Windows Server 2008 R2

1.Install the board and boot up Windows.

2.Right click Computer, click Manage, double click Diagnostics, then click Device Manager.

3.Insert the driver CD. Starting from top, right click PCI Serial Port, click Update Driver Software. Close the AutoPlay box if displayed.

8

Image 8

Contents System Requirements Key Features and BenefitsIntroduction PackageContents Hardware Installation Driver Installation Windows 7 32-/64-bitWindows Vista 32-/64-bit Click Browse my computer for driver softwareWindows XP 32-/64-bit / Server 2003 32-/64-bit Click I dont have the disk. Show me other optionsWindows Server 2008 32-/64-bit Windows Server 2008 R2 Click Browse my computer for driver software advancedWindows To Verify Windows Installation Click Change Port Number or Advanced Changing Serial Port NumberWindows ME Windows 98 / 98SE To Verify Windows ME / 98SE / 98 / Installation DOSBlank Technical Support and Warranty SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA #About SIIG, Inc