SIIG 701P48438 manual Technical Support and Warranty

Page 19

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond.

SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details. If you encounter any problems with this product, please follow the procedures below.

A)If it is within the store's return policy period, please return the product to the store where you purchased from.

B)If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510) 413-5333.

Step 2: After obtaining an RMA number, ship the product.

Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included.

Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

You are responsible for the cost of shipping. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #:

SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.

19

Image 19
Contents Features and Benefits Introducing the FireWire 800 + Hi-Speed USB ComboFireWire 800 1394b interface USB 2.0 interface SystemRequirementsBoardLayout PackageContentsUSB Pin-out Header USB Pin-out HeaderInserting the PCI Board Hardware InstallationUSB 2.0 Driver Installation Windows Driver InstallationFor Window 2000 with SP3 or earlier Windows2000 FireWire 800 Driver InstallationBit Windows XP Bit Windows XP Bit Windows Server For 64-bit Windows Vista In the Start Search box, type Windows VistaTo Verify Windows Installation USB Driver Installation Mac OS Driver InstallationMac OS 8.6-9.x, OS X version 10.2.7 and earlier Mac OS X version 10.2.8 or later FireWire Driver InstallationTo Verify Mac OS Installation Connecting DevicesUSBDevices FireWireDevices For Windows Vista Select InstalltheSoftwareAutomatically, then click NextClick Locate and install driver software For ServerClick Start, Programs, Unibrain ubcore, Tools then ubSwitch UbSwitch Utility for Windows onlyBlank Blank SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc