SIIG 5.1 specifications Driver Installation, Bit Windows XP/Server

Driver Installation

Windows 2000

1.Boot up Windows, at the Add New Hardware Wizard, click Cancel, then insert the driver CD.

2.Click Start, Run, type D:\32bit\setup.exe, then click OK. (Change D: to match the drive letter of your CD-ROM)

3.At the Welcome screen, click Next.

4.At the Select Components screen, select Install Envy24 Family Audio Device Driver, then click Next.

5.At the Choose Destination screen, click Next.

6.SelecttherestartWindowsoption,thenclickFinish.

32-bit Windows XP/Server 2003

1.Boot up Windows, at the Found New Hardware Wizard, click Cancel, then insert the driver CD.

2.Click Start, Run, type D:\32bit\setup.exe, then click OK. (Change D: to match the drive letter of your CD-ROM)

3.At the Welcome screen, click Next.

4.At the Select Components screen, select Install Envy24 Family Audio Device Driver, then click Next.

5.At the Choose Destination screen, click Next.

6.If prompted, at the Hardware Installation box, click Continue Anyway, otherwise go directly to step 7.

7.SelecttherestartWindowsoption,thenclickFinish.

5