SIIG 7.1 manual Windows XP, Windows Server, Click Sounds and Audio Devices

Page 7

3.Follow the on screen instructions to configure your speakers.

Windows XP

1.From the main desktop, click Start, Control Panel.

2.Click Sounds and Audio Devices.

3.Select the Audio tab.

4.Click Advanced under Sound Playback, then click the Speakers tab.

5.Select your speaker type from the drop down list.

6.Click OK to save the settings.

Windows Server 2003

Make sure to log in as Administrator or an account with administrative privileges.

1.From the main desktop click Start, Control Panel.

2.Click Sounds and Audio Devices.

3.Select the Audio tab.

4.Click Advanced under Sound Playback, then click the Speakers tab.

5.Select your speaker type from the drop down list.

6.Click OK to save the settings.

Windows 2000

1.From the main desktop, click Start, Settings, Control Panel.

7

Image 7
Contents Serial Number Sticker Features and BenefitsRequirements Package ContentsLayout Page At User Account Control, click Yes Software InstallationAt the AutoPlay box Click Run Setup.exe WindowsWindows XP / Server 2003 To Verify InstallationIf AutoPlay doesnt start Click Start, in Start Search Windows 7 / Vista / Server Xear 3D Audio Configuration UtilitySpeaker Configuration Enable/Disable Optical S/PDIF OutputWindows Server Windows XPClick Sounds and Audio Devices Double click Sounds and Multimedia, click Audio tab Microphone ConfigurationSelect Microphone USB PnP Sound Device, click Properties Check Microphone Boost, click OK Uninstalling the Soundcard DriverClick Control Panel, double click Add/Remove Programs Windows XP / ServerSIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyProduct Name About SIIG, Inc