SIIG 04-0631A manual Driver Installation, Windows 7 32-/64-bit, Windows Vista 32-/64-bit

Page 5

Driver Installation

Windows 7 (32-/64-bit)

1.Install the board, then boot up Windows.

2.At the Windows desktop insert the driver CD.

3.At the CD AutoPlay box, click Open folder to view files.

4.Double click Setup (Application).

5.Follow the on screen instructions to complete the installation.

Windows Vista (32-/64-bit)

1.Install the board, boot up Windows.

2.At Found New Hardware, click Cancel.

3.Insert the software CD.

At the CD Auto Play window: click Open folder to view files. Double click Setup (Application).

If CD Auto Play doesn't start: click Start, in the Start Search box, type D:\setup.exe, press Enter. (Change D: to match your CD/DVD-ROM drive letter)

4.Follow the on screen instructions to complete the installation.

Windows XP (32-/64-bit)

1.Install the board, boot up Windows.

2.At the Found New Hardware Wizard, click Cancel.

3.Insert the software CD. Click Start, Run, type D:\Setup.exe, then click OK. (Change D: to match your CD/DVD-ROM drive letter)

4.Follow the on screen instructions to complete the installation.

5

Image 5
Contents SystemRequirements Key Features and BenefitsLayout PackageContentsAudioConnectors Hardware Installation Windows 7 32-/64-bit Driver InstallationWindows Vista 32-/64-bit Windows XP 32-/64-bitWindows Server 2003 & 2008 32-/64-bit To Verify Windows InstallationAt Found New Hardware..., click Cancel Enable Windows Audio Uninstalling the Soundcard DriverSounds and Multimedia Properties Audio Configuration Windows XP / Server 2003Windows Vista Enable Digital CD PlaybackClick Start, Control Panel Click Control Panel, Sounds and Audio DevicesControl Panel Audio DeckQuick Start Icon Page Pdif Control Playback SpeakerRecording KalaOK Sound EffectsAdvancedControls Information SpeakerTestBlank Blank SIIG, Inc Stewart Avenue Fremont, CA 94538-3152, USA RMA # Technical Support and WarrantyAbout SIIG, Inc