Decals - Safety & Common
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
B |
A-RG42316B
C |
B
THROTTLE
Choke
Fast
Slow
XXXXXTRACTORS
DRIVE BELTS & MOWER BLADES
Transmission Belt
Gear | XXXXXX |
Hydro | XXXXXX |
38" Mower |
|
Drive Belt | XXXXXX |
Mower Blade - Left | XXXXXX |
Mower Blade - Right | XXXXXX |
44" Mower |
|
Deck Drive Belt | XXXXXX |
Drive Belt | XXXXXX |
Mower Belt | XXXXXX |
38" / 44" Snowthrower Drive Belt | XXXXXX |
For safety and reliability, insist on genuine Simplicity Manufacturing, Inc. belts and blades...our name stamped on the part is your assurance of quality.
DO NOT TOW TRACTOR!
Damage may result to transmission
D |
E |
| OPERATION |
|
| |
| To Start Engine | PTO Switch | Ignition Switch | |
| • Seat must be occupied, ground speed control pedal in neutral, |
| OFF |
|
| PTO switch must be off, and clutch/brake pedal depressed. |
| RUN |
|
| When Operator Leaves Seat | Parking Brake | START |
|
| • Put ground speed control pedal in neutral, |
|
| |
C | turn PTO switch off, and set parking brake. | To Set Parking Brake |
|
|
Traction Control | • Pull knob UP while clutch/brake pedal is depressed. | |||
• Release clutch/brake pedal while holding knob. | ||||
• To stop tractor motion, fully depress clutch/brake pedal. | Release Parking Brake |
| ||
• On hydrostatic drive tractors, movement of traction pedal | To• Depress clutch/brake pedal. |
| ||
| from neutral, in either direction, increases ground speed. | • Push knob DOWN while clutch/brake pedal is depressed. | ||
| To Operate PTO Clutch | Clutch/Brake | Mower | Mower DOWN |
|
| |||
| • The operator must be in seat. | Pedal | Height |
|
| • To engage PTO, pull PTO switch up. |
| Adjust |
|
| • To disengage PTO, push PTO switch down. |
|
| Mower UP |
WARNING
AVOID SERIOUS INJURY OR DEATH
• Read operator's manual(s). | • If you cannot back up a hill, do not operate on it. | |
• Know location and function of all controls. | • Go up and down slopes, not across. | |
• Keep safety devices (guards, shields, and switches) | • If machine stops going uphill, stop blade and | |
in place and working. | ||
back down slowly. | ||
• Remove objects that could be thrown by the blade. | ||
• Be sure blade(s) and engine are stopped before | ||
• Do not mow when children or others are around. | ||
• Never carry children. | placing hands or feet near blade(s). | |
• Look down and behind before and while backing. | • When leaving machine, shut off engine, remove | |
• Avoid sudden turns. | key, and set parking brake. |
DANGER | DANGER |
ROTATING BLADES CUT | OPERATING ON SLOPES |
OFF ARMS AND LEGS | CAN BE DANGEROUS |
STOP MOWER WHEN | SEE OPERATOR'S MANUAL. |
CHILDREN ARE NEAR. | IF YOU CANNOT |
NO RIDERS — THEY FALL OFF. | A HILL |
1716530
I |
G |
D |
E |
F |
TRANSMISSION RELEASE VALVE LEVER
To bypass transmission and allow manual pushing of tractor:
1 | Lift Lever Up | 2 |
2 | Pull Rearward | 1 |
3 Push Down | ||
|
| 3 |
DO NOT ACTIVATE
WHILE ENGINE IS RUNNING.
F |
G |
DANGER | DANGER |
| ||||
|
|
|
|
|
|
|
ROTATING CUTTING BLADE | ROTATING CUTTING BLADE |
| ||||
Do not operate mower | Do not put hands or feet |
| ||||
without deflector or entire | under mower deck while |
| ||||
grass catcher in place. 1704277 | blade is rotating. | 1704276 |
The above parts group applies to the following Mfg. Nos.:
1693074 | Regent 14G | 1693088 | Regent 16H | 1693102 | 2514H, 14H | 1693333 | Regent 14H | 1693347 | 2514H, 14H | 1693188 | 44” Mower |
1693076 | Regent 14G | 1693090 | Regent 16H | 1693104 | 2516H, 16H | 1693337 | Regent 16H | 1693349 | 2516H, 16H | 1693189 | 44” Mower |
1693080 | Regent 14H | 1693092 | 514G, 14G | 1693323 | Regent 14G | 1693339 | 514G, 14G | 1693078 | 38” Mower |
|
|
1693082 | Regent 14H | 1693094 | 514H, 14H | 1693325 | Regent 14H | 1693341 | 514H, 14H | 1693079 | 38” Mower |
|
|
1693084 | Regent 16G | 1693098 | 516H, 16H | 1693329 | Regent 16H | 1693343 | 516H, 16H | 1693218 | 38” Mower |
|
|
1693086 | Regent 16G | 1693100 | 2514G, 14G | 1693331 | Regent 14G | 1693345 | 2514G, 14G | 1693169 | 44” Mower |
|
|
© Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved. | 38 |