Sears VW199 manual Detaching the arm/stand for Vesa wall mount, To detach the arm/stand

Page 12

2.1Detaching the arm/stand (for VESA wall mount)

The detachable stand of the VW199 Series LED monitor is specially designed for VESA wall mount.

To detach the arm/stand:

1.Remove the arm cover.

2.Have the front of the monitor face down on a table.

3.Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows.

4.Detach the stand from the monitor.

•We recommend that you cover the table surface with soft cloth to prevent

damage to the monitor.

•Hold the stand of the monitor when you remove the screws.

screws

• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.

2-1	Chapter 2: Setup

Image 12

Contents User Guide JulyTable of contents Federal Communications Commission Statement Safety information Care & Cleaning Following symptoms are normal with the monitorWhere to find more information Asus websites Optional documentationPackage contents WelcomeAssembling the monitor Monitor introductionFront of the LED monitor To assemble the monitorButton 1.2 Rear of the LED monitor Detaching the arm/stand for Vesa wall mount To detach the arm/standAdjusting the monitor How to reconfigure OSD On-Screen Display menuOSD Function Introduction SplendidSRGB ColorSelect the image color you like from this function Image Input SelectSelects the input source from VGA or DVI VW199T/N System Setup Adjusts the system configurationSpecifications ModelTroubleshooting FAQ Possible SolutionMode Resolution HKHz VHz Pixel MHz Supported timing list